NH/ME/VT/MA - Any Fabricators Out There?

Northeast Region including New York, Rhode Island, Vermont, New Hampshire, Maine, Delaware, Maryland, Pennsylvania, Virginia, West Virginia, Massachusetts & Connecticut - Tearjerkers founder Todd Brunengraber Also New England, New York State, Liberty Bell, and Potomac Basin Chapters of the TearJerkers

NH/ME/VT/MA - Any Fabricators Out There?

Postby Tobit » Wed Feb 12, 2014 12:43 pm

Hey guys, I'm in Southern NH. I'm looking for anyone who might be able/willing to give me a hand fabricating a frame for a trailer I want to build. I have no welding experience but will definitely help you out as much as I can and pay well for your time. I haven't called any of the local trailer shops here yet. I was hoping to meet new people here and take part in the frame construction aspect of my build.

Thanks
User avatar
Tobit
Teardrop Builder
 
Posts: 30
Joined: Tue Feb 11, 2014 6:42 pm
Location: Southern NH

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby George Taylor » Wed Feb 12, 2014 8:17 pm

What town do you live in? I am from New Boston, NH. It might be easier for you, unless you have specific things you want, to find an older trailer frame. I do know someone that is realy good in the welding department in Plastow.
George Taylor
Teardrop Master
 
Posts: 214
Images: 12
Joined: Sat Mar 13, 2010 9:18 pm
Location: New Boston, NH

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby Tobit » Wed Feb 12, 2014 10:11 pm

Thanks George. I'm in Manchester.

I already have an old trailer but it might be a bit too small for what I want to do. It's an old Bantam T3C.
User avatar
Tobit
Teardrop Builder
 
Posts: 30
Joined: Tue Feb 11, 2014 6:42 pm
Location: Southern NH
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby mary and bob » Wed Feb 12, 2014 10:52 pm

Don't cut up the Bantam!! I want it.
mary and bob
500 Club
 
Posts: 722
Images: 3
Joined: Sun Nov 18, 2007 8:03 pm
Location: chatham n.y.
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby George Taylor » Thu Feb 13, 2014 8:26 pm

Yea, that trailer did look small. The Harbor Freight ones might work for you if you bolt and weld the trailer.
George Taylor
Teardrop Master
 
Posts: 214
Images: 12
Joined: Sat Mar 13, 2010 9:18 pm
Location: New Boston, NH
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby Arne » Tue Aug 05, 2014 4:37 pm

Sorry about this, but I can't find anything about Ross Hill (CT) this August.... can anyone tell me if it is still on in 2014 and what the dates are?

If there is a topic on this, please let me know as I cant' find it via a search.... Arne (yes, my house is done and I will be camping again)
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby George Taylor » Tue Aug 05, 2014 7:16 pm

It is happening this week end. We are leaving our house in New Boston Thursday night. Are you going to camp? If so I would join up on the Tearjerkers page and check the New England chapter list. Send a PM to Nancy Scalzi. She is the one who deals with the sites the camp ground reserved for the group.
George
George Taylor
Teardrop Master
 
Posts: 214
Images: 12
Joined: Sat Mar 13, 2010 9:18 pm
Location: New Boston, NH
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby Arne » Tue Aug 05, 2014 8:02 pm

Got it, thank you.. yes, I made a reservation and will be there on Friday night.. see you there. Arne
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby George Taylor » Tue Aug 05, 2014 8:03 pm

What site did you get?
George Taylor
Teardrop Master
 
Posts: 214
Images: 12
Joined: Sat Mar 13, 2010 9:18 pm
Location: New Boston, NH
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby Arne » Tue Aug 05, 2014 9:48 pm

I got 65, near one corner of the ttnt group. Probably lucky to have gotten that one. In previous years if I was this late, I would have been on the outskirts.
www.freewebs.com/aero-1
---
.
I hope I never get too old to play (Arne, Sept 11, 2010)
.
User avatar
Arne
Mr. Subject Line
 
Posts: 5383
Images: 96
Joined: Fri Aug 13, 2004 12:25 pm
Location: Middletown, CT
Top

Re: NH/ME/VT/MA - Any Fabricators Out There?

Postby Ionraice » Thu Aug 28, 2014 3:56 pm

I am near Lowell, MA. I have not attempted to build anything yet.
Ionraice
Teardrop Inspector
 
Posts: 2
Joined: Mon Aug 18, 2014 5:02 pm
Top


Return to Northeast

Who is online

Users browsing this forum: No registered users and 2 guests