For Sale - Pair of new sliding 14" x 24" windows - SOLD

[Prototear]

I have a pair of sliding windows for sale. They are made for a 14" high by 24" wide opening and have a silver frame and a black trim ring. I had tried to install these in my trailer build but had made an error in my window openings so had to get slightly bigger windows, described here in my build journal.
http://www.tnttt.com/viewtopic.php?f=50&t=57021&start=90#p1169645

I bought them from Grant at Lil Bear in 2014 and they have a sticker showing a manufacture date in 2013. They are for a horizontal orientation an you can have the screen on either the right or left.

Asking $175 obo for the pair plus shipping. Comparable windows run about $110 each. If you are in the Seattle area we can meet somewhere and save the shipping charge. If these can work for you then my mistake is your gain! PM me if you would like to arrange to meet or make an offer.

[videographer]

How thick is the flange?

Sent from my SM-G900P using Tapatalk

[Prototear]

How thick is the flange?

I measured the width of the flange both inside and outside and added these pictures to make it clear what I measured. The width from the inner frame to the outer edge of the flange is between 9/16" and 5/8"


The outer flange is about 1-3/16"


I also measured the inner frame radius as 3-1/4":


The trim ring is about 15/16" wide and 3/4" deep


Thanks for your interest in the windows!

[videographer]

Hey Proto, sorry about the delay. If the windows are still available, I'll take them both. Email me at [email protected] and we'll set it up!

Thanks.