Kampmaster, Campmaster, Wild Goose

[Ron Dickey]

Image Sites where I have found Kampmaster, Campmaster, Wild goose type trailers

Does anyone know of anyone who has made one and how much heavier would this be??

Jerry of Maxitear has one, shown below. Is it equal or liter then your Maxitear.

http://www.teardroptours.com/7thBIGPIX/WilsonB.JPG

close up shots of a old gost of a Kampmaster

http://teardropparts.com/adsplaced.htm

go 9 ads down and click on each picture really good photos.

here are some of them.

http://teardropparts.com/photos/Family% ... %20096.jpg

http://teardropparts.com/photos/Family% ... %20098.jpg

Jerry Piper has one for sale.
http://www.maxitear.com/sale.htm with many others trailers there.

http://www.maxitear.com/kampmaster.htm

cross between a teardrop kampmaster it does not show the sides.

http://www.oldwoodies.com/img/trailers/ ... er_med.jpg

cleanist one I have seen

http://www.300f.com/teardrop/kamp1.jpg

Ron Dickey
Los Osos, CA

[mikeschn]

Kampmaster. It's a bit wider, and a bit longer. It would probably be in the 1200 to 1500# range. That's a nice trailer.

One person even built a slide out into one...


I was thinking about building one, but then I didn't want to build that complex at this point in time.

Mike...

[Joseph]

Hey Mike,

Kampmaster. It's a bit wider, and a bit longer. It would probably be in the 1200 to 1500# range.

Not necessarily - the originals were around 800#. Of course they didn't have A/C, heaters and the like... :tard:

Joseph

[Ron Dickey]

Mike,

the Photo is that a new one or revamp?

It is wide because the bed is sideways?? couldn't a slide out be used on a narrower one.

couldn't it be the width of a Toyota pickup and it would still need some length. Which would reduce the weight. As well as may furniture now a day can be made with lighter materials.

Ron D.

[Ron Dickey]

Of-thestorm,

above it the one Mike S. posted.

Nice looking thing.

Ron D.

[nater104]

I saw this on one of those links up there. What do you think of the way the hatch is cut? It looks like that straight edge would be easier to make than the usual where the curve is higher on the edge. Do you like the look of it?
Here is a link to a bigger view: http://teardropparts.com/photos/Family%20Pictures%20097.jpg