Also the door lock/handle is a bit low, cause of the window . So this is why it leans out at the top
I decided to pull off the seals and start over. Closing the door and seeing where the most light comes in.
It appears the door isn't closing enough, so I adjusted the striker plate in. Seemed to help.
After some pushing and pulling in different areas.
For an experiment ;;;; I tried a thicker seal at the bottom to help push the top edge of the door in.
It worked.
2nd pic is where the camper tape was used
Tomorrow I can finish this up.
Sent from my H1611 using Tapatalk
