One shot at a radius for square profile. Using with Trailtop

[saywhatthat]

One shot at a radius for square profile. Using with Trailtop Fiberglass component trailer kit
As this is the best place to receive information on the web. Where I receive my Trailtop components has proposed they manufacture tooling for one round radius for me.
What would be best radius? I was thinking 30 radius’’ Would be the most universal radius. Any input would appreciated. picture of square profile 2x1.2 by 2''

sm6.jpg (56.08 KiB) Viewed 938 times

[DaddyJeep]

30" radius seems pretty huge to me. Where would this be? Top edge all around or just front edge? I have 11.5" radius on top edges and verticle front corners and an 18" radius on front top.

[saywhatthat]

Thank you DaddyJeep for your post . This is for a freestyle universal kit.

[saywhatthat]

Thinking can cut up radius for round front. Are the Serro Scotty Sportsman ,THE SIMPLE http://tnttt.com/Design_Library/The%20Simple.htm#rimple. Even better the KAMPMASTER TRAILER / Wild Goose design. There no way of messing up a glue and go trailer . If you ever played with Lego Be even easy to preform Ellipses not what it looks like I have when I dance http://tnttt.com/Design_Library/New%20KampMaster.htm

trailer4561.jpg (8.65 KiB) Viewed 832 times

[saywhatthat]

I decided to go with the 30'' radius With an round insert as free one and buy a 18'' tooling With round insert . That way can have 45% and 3'' radius corners. If you have better thought .Please let me know by Friday. The picture is of a 45% the insert will just round the corners off .

small2.jpg (46.35 KiB) Viewed 729 times