noseoil wrote:A router with a straight-cut bit & a compass arm works really well also. Just need to be careful when starting & finishing the cut. I've never really cared for a jig saw for precision work, always a bit of run-out when using them. Good tip about moving the center, thanks.
x2 for the router and a straight bit. skip over a small spot, maybe 3/16" across from where you started, and stop just shy of making the complete circle. The arm is attached to the part that is getting cut out.
Return to Teardrop Construction Tips & Techniques
Users browsing this forum: No registered users and 1 guest