Page 3 of 14

PostPosted: Thu Feb 16, 2006 6:17 pm
by Gage
Best I could do for a profile shot of the Scotsman Tear HB.

Image

Have a good day.
8)

PostPosted: Sun Feb 26, 2006 9:48 pm
by jje507
Here's mine, not as nice as some, but we like it! :)
Image

PostPosted: Sun Feb 26, 2006 10:22 pm
by Gage
jje507 wrote:Here's mine, not as nice as some, but we like it! :)

Wrong, it's just as nice as all the others. There are no two teardrops alike, but they are all nice.

Have a good day.

8)

PostPosted: Thu Apr 06, 2006 8:05 pm
by Chip
Here is a side shot of the "Pickle Inn"
Image

chipper :picklejuice:

PostPosted: Thu Apr 06, 2006 8:10 pm
by Micro469
Those are nice wheels Chip... What size and what make?

PostPosted: Thu Apr 06, 2006 8:44 pm
by Kurt (Indiana)
Image
They're all so different. Each has its own personality, just like the owners. That's what makes it fun. 8) :thumbsup:

PostPosted: Thu Apr 06, 2006 9:24 pm
by Steve Frederick
Here's three of the four so-far!
The Stripper..
Image
Our Lil'Diner..
Image
A custom design for Peg..
Image

PostPosted: Thu Apr 06, 2006 9:25 pm
by Steve Frederick
Kurt (Indiana) wrote:Image

I really like this one!! What's the design?? :thumbsup:

PostPosted: Thu Apr 06, 2006 9:49 pm
by asianflava
Hopefully it will look different in a couple weeks.
Image

PostPosted: Thu Apr 06, 2006 10:01 pm
by SmokeyBob
Here's mine. Trailer light's installed the day after I took this pic. Now if I can just build these doors.

Image

PostPosted: Fri Apr 07, 2006 4:34 am
by Kurt (Indiana)
Steve Frederick wrote:
Kurt (Indiana) wrote:Image

I really like this one!! What's the design?? :thumbsup:

Steve, It's one-off design based on the Quick Silver shape with a KenSkill type skirt. I mis-calculated on the tail end and changed the shape to a more pointed one. Kit fenders ended up have a very simlar shape to the body of the teardrop.
The Galley is based on the Modernistic style ( only the counter top is about 6"-8" taller). :thinking: I did'nt like bending over to cook and prepare foods. :roll:Image

PostPosted: Fri Apr 07, 2006 6:47 am
by vairman
And here is mine....

Image

Greg :)

PostPosted: Fri Apr 07, 2006 7:09 am
by Chip
John,, thanks, the wheels are from a 1972(I think) Plymouth Baracuda , they are 14" with a 5x4.5 bolt pattern,,

chipper

PostPosted: Fri Apr 07, 2006 9:38 am
by Nitetimes
This is as close as I can get until I get it out of storage

Image

PostPosted: Fri Apr 07, 2006 11:37 am
by dacrazyrn
Here is mine The GT/HOT Bullnose (get the hell outta town)...modified from pics of the Camp-Inn '06 Teardrop...sorta.
Image
Little farther along than this pic at the moment. Doors and hatch are on (temporarily) finishing the inside and gotta move that axle back and bigger tires. Not to mention the whole galley and main electrical (wires in place). Too damn cold and windy to do anything today...so she stays under wraps for now.