Where's the spare?

Anything to do with mechanical, construction etc

Postby mikeschn » Thu Jun 17, 2004 9:40 am

So Joseph,

Are you trying to tell us that you are almost 56 years old? I just looked at the calendar to see if you put your birthday in, but I couldn't find it. So you'll have to tell us if you want some birthday greetings or retirement wishes, which ever applies! :laughing8:

Seriously though, I haven't bought a spare for the teardrop yet, and now I may just do what you do. Get a 12v air pump and a repair kit instead! Thanks for the idea!

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI

Postby Shrug53 » Thu Jun 17, 2004 10:24 am

Not a bad idea, but what if it is raining, or snowing, or 110 degrees (like it is here)? It would be kind of hard to sit and patch and then wait to cure and then fill it.
If you are worried about tongue weight and still want a spare, consider something like a continental kit, where the tire folds back and down (on my Chevy this would be to access the trunk.

Or put a reciever on the back of your trailer and get a Universal Receiver Spare Tire Carrier that can be found at:

http://www.hitchcorner.com/trailer-hitc ... sories.htm

About halfway down the page. This will let you carry any kind of spare on the back of the trailer!
"Better living through reckless experimentation"
http://www.forgottenclassics.com
User avatar
Shrug53
500 Club
 
Posts: 546
Joined: Tue Jun 08, 2004 9:17 am

Postby Joseph » Thu Jun 17, 2004 11:29 am

mikeschn wrote:Are you trying to tell us that you are almost 56 years old?

Hey Mike,

Not trying to tell you anything other than how I deal with flats. Glad you like the idea!

And the Navy took away my birthday years ago, so no need to look for it anywhere. :tongue:

Joseph
User avatar
Joseph
Teardrop Pirate
 
Posts: 1774
Joined: Fri Apr 16, 2004 5:21 am
Location: Excelsior Springs, MO
Top

Postby tdhombre » Thu Jun 17, 2004 11:41 am

mikeschn wrote:Dave,

You could set it on your running board, and put 1 bolt through your sidewall!

.


Yo - I didn't even think of that. I'll consider it. Thanks.
tdhombre
Teardrop Advisor
 
Posts: 95
Images: 8
Joined: Tue Apr 20, 2004 11:19 am
Location: Morro Bay, CA
Top

Postby tdhombre » Thu Jun 17, 2004 11:45 am

mikeschn wrote:You could set it on your running board, and put 1 bolt through your sidewall!


Duh! I didn't even consider that! It might even be better of over a fender so the weight wouldn't a factor. Thanks for the suggestion.
tdhombre
Teardrop Advisor
 
Posts: 95
Images: 8
Joined: Tue Apr 20, 2004 11:19 am
Location: Morro Bay, CA
Top

Postby BufordT » Thu Jun 17, 2004 11:48 am

Don who has a plan set called the Call of the Wild mounted his spare tire on the side like that and it looks great.

Bufordt :twisted:
"RUSH" The Man, The Legend, The Way Of Life.
User avatar
BufordT
2nd Teardrop Club
 
Posts: 661
Images: 23
Joined: Wed Apr 14, 2004 3:50 pm
Location: Palm Bay Fl.
Top

Postby Joseph » Thu Jun 17, 2004 11:17 pm

Shrug53 wrote:Not a bad idea, but what if it is raining, or snowing, or 110 degrees (like it is here)? It would be kind of hard to sit and patch and then wait to cure and then fill it.

First off, if it's raining or snowing, then I've picked the wrong time to camp in a teardrop. I don't worry about 110 degree weather because we don't get it here. Finally, there's nothing in the patch to "cure" - in short, you plug the hole, fill the tire and roll. The actual plugging takes less time than it does to get the wheel off, and as for waiting to fill it, the pump can run while you're sitting inside the tow vehicle or the trailer - it has an automatic cut-off when you reach the selected pressure.

Joseph
User avatar
Joseph
Teardrop Pirate
 
Posts: 1774
Joined: Fri Apr 16, 2004 5:21 am
Location: Excelsior Springs, MO
Top

Postby Nick Taylor » Fri Jun 18, 2004 9:20 pm

I just had an interesting idea for the spare tire problem. Carry around a wheel adapter to fit your tow vehicle spare to the trailer.

My 1947 Ken-Skill already has wheel adapters on it since the aluminum wheels are a different pattern. I'll have to look into getting one to fit my 5x100 bolt pattern mini spare on the trailer.

Nick.
User avatar
Nick Taylor
The 300 Club
 
Posts: 432
Joined: Tue Jun 08, 2004 8:18 pm
Location: San Diego, CA
Top

Previous

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 9 guests