I finished the frame for the galley on my Cubby and temporarily attached it using the hurricane hinge.
Question: On the hinge there is one flange that is flat, but has two very small "C-shaped" flanges or edges. It looks like the c-shaped flanges were made to allow you to slide a covering piece of aluminum or other material into it to hide the screws or somesuch. What do you believe this c-shape is for?
As an aside, the Cubby plans have a photo showing that c-shaped flange on the cabin or upper side...that results in a space of `13/16" when the galley cover is flat or in the stored position. If that c-shaped flange is reversed so that it is screwed to the galley cover, then there is a 3/8" space...just what there should be.
How did you figure it out?
John at Salida, CO