aluminum in Nor Cal

[mariannf]

Hi all,
Does anyone have suggestion about where to buy aluminum sheet in Nor Cal? I have a 5x10x5 design, and am only putting aluminum from end to end over the roof...so i will need a 20 foot sheet that is 5' wide. i have sub roof materials (3mm birch) so want a low gauge thickness.
any suggestions appreciated!

[Redneck Teepee]

Any sheet metal shop can order it in for you, or tell you where to order from, if the supplier sells to the general public.

[mariannf]

thanks!

[Dale M.]

Depending on where you cal Nor-Cal...

http://www.all-rite.com/siding-c-30.htm ... 7f7ca02ac7

Dale

[mariannf]

Depending on where you cal Nor-Cal...

http://www.all-rite.com/siding-c-30.htm ... 7f7ca02ac7

Dale

Thanks Dale!

[DaveS]

Coast Aluminum in Hayward

http://coastaluminum.com/contact/

I bought 5x12 sheets of .032 thick 5052 from them. They had it in stock Figured sheets would be easier to handle/install than coil. Make sure you ask to have protective film put on one side. Was no additional cost and saved me a couple of times.

[vegask]

SAF in Redding. Ask for David Emry if you need a sales rep. Shipping/freight is free on anything over 100lbs and they do anodized finishes.

[SC Campbell]

I get my aluminum from Cardo Industries in Sacramento

1054 El Camino Ave, Sacramento, CA 95815 · (916) 922-7824
cardoindustries.com

[mariannf]

I get my aluminum from Cardo Industries in Sacramento

1054 El Camino Ave, Sacramento, CA 95815 · (916) 922-7824
cardoindustries.com

Thanks!