2 piece roof?

Anything to do with mechanical, construction etc

2 piece roof?

Postby RubberGypsy » Fri Feb 03, 2017 12:32 pm

Hi - I'm doing a re-build. While tearing off the roof I discovered that this Tear has 2 pieces of the top flooting roof.
Obviously, this is not ideal but, I thought I'd ask. How would you tackle this? Add another ply maybe and just cover over it?
Trash it and go w/ something else?

Originally it was joined w/a glued and screwed board on the top. Also, no edge trim (place of purchase recommendations?)

Here's my build thread:
viewtopic.php?f=50&t=67838

And a link to my google pics:
https://drive.google.com/open?id=0B18se ... 2pfZXBqTnM


I've considered skinning the thing but,
1. I want to run new wires
2. Add insulation
3. Wanna clean any mold
4. I don't trust the original contstruction
and as you can see from the pics, I really need to get in there and check this out.

Thank for any comments!!
Andy
User avatar
RubberGypsy
Teardrop Inspector
 
Posts: 11
Images: 0
Joined: Sun Nov 13, 2016 8:44 am
Location: Raleigh, NC

Return to Teardrop Construction Tips & Techniques

Who is online

Users browsing this forum: No registered users and 4 guests