Happy Holidays Everyone!!
So, I took some advice from a neighbor who sounded like he knew what he was talking about and built walls 1 1/2" thick! I'm almost positive this is overkill, but it's sturdy as all hell and I routed out a bunch of sections from the walls and added foam insulation to take some of the weight out before I skinned the walls with plywood
Anyway, I am building my own doors and they are 30" X 36" with a 3" radius on each corner. I cannot find any trim nor any T-Molding that will cover the thickness of the 1 1/2" door without leaving some of the wood exposed...
There must be someone out there who's built a TD with thicker doors and had to use something else to Water-Seal his/her doors?
My best guess is to use Surfboard Resin or Epoxy to seal the wood on the doors and then cut four corners and four straight lengths out of some sturdy sheet metal to be attached inside the doorjamb and then that's what the weather stripping / Gasket rests on to make the seal??
Any Ideas out there better than this one? I'm not even sure mine makes sense!!
Holy Crap am I learning a lot this first time around...