Page 1 of 1

Curtains

PostPosted: Sun Apr 15, 2018 3:26 pm
by Fiddlin'Billy
My wife is making curtains for our teardrop. It has manufactured doors. How does one attach curtains to that style of door w/o damaging them?

Re: Curtains

PostPosted: Sun Apr 15, 2018 6:25 pm
by tony.latham
I installed marine curtain tracks above the door frames.

Image

Image

Image

https://www.sailrite.com/Curtain-Track-Horizontal-Aluminum-48

Works great. 2' will cover a Vintage Tech glass door. You have to buy the snap-on tape, carriers and end stops if I recall.

Tony

Re: Curtains

PostPosted: Sun Apr 15, 2018 6:45 pm
by linuxmanxxx
I just got some elastic pushed through curtains and attached right above door to wall. Stretched taught and it worked perfect.

Sent from my Pixel 2 XL using Tapatalk

Re: Curtains

PostPosted: Sun Apr 15, 2018 8:29 pm
by steve cowan
We used cheap adjustable width curtain rods hung on end brackets.

Image

Re: Curtains

PostPosted: Sun Apr 15, 2018 9:00 pm
by Woodbutcher
I used a small rod that I shortened to just a few inches wider then the window. My wife sewed me a double sided curtain that rolls up and is secured with velcroe. Works great, I do all my trailer curtains this way.

Image

Image

Re: Curtains

PostPosted: Mon Apr 16, 2018 2:41 am
by les45
We made our curtains out of a cloth shower curtain with the metal grommet rings at the top. They hang from two cup hooks at the upper corners of the door and are opened by simply dropping one side and re-attaching to close.

Image

Re: Curtains

PostPosted: Thu Apr 26, 2018 10:31 am
by Nobes
we use tension rods in the window opening in the door