What's behind that wall?
Posted: Wed Feb 10, 2021 1:08 pm
I'm at the point in my build where I need to tie some things to the galley bulkhead I'd built several years ago, and it seems I deviated from the plans a little and forgot to properly note the changes.
It turns out an old fashioned stud finder works wonderfully for this
Probably obvious, but I don't remember it mentioned on TNTTT, so thought I would.
Our bulkhead is 1/8" Baltic birch over 3/4" plywood and blue foam. The stud finder measures electrical capacitance (I think). I clicked on it on an area I was confident was over foam, and the transitions to the plywood regions were crisp and clear.
Tom
It turns out an old fashioned stud finder works wonderfully for this
Probably obvious, but I don't remember it mentioned on TNTTT, so thought I would.
Our bulkhead is 1/8" Baltic birch over 3/4" plywood and blue foam. The stud finder measures electrical capacitance (I think). I clicked on it on an area I was confident was over foam, and the transitions to the plywood regions were crisp and clear.
Tom