Teardrops n Tiny Travel Trailers

by **BigAl** » Wed Mar 10, 2010 1:44 pm

I went 'off plan' before my trailer frame was finished, but having a 'plan' at the start does make you focus at least on the major components, even is that plan only in your head.

by **absolutsnwbrdr** » Wed Mar 10, 2010 1:52 pm

I have drawn very detailed plans.... its just the way I am... I need to be able to work something out on paper (or AutoCAD) before I just dive in to it.

by **magilla** » Wed Mar 10, 2010 8:31 pm

I had a chassis plan......and that was it.
Mind you there were some head scratching moments along the way, but thats all part of the fun.
Am now seeking a chassis plan for a eight or nine by five footer, metric would be good

by **sagebrush** » Thu Mar 11, 2010 9:27 pm

I started with Mikes ultralight profile and am just winging it. MAN THIS IS FUN!!!!

Will

by **dwgriff1** » Fri Mar 12, 2010 12:20 am

I used Sagebrush's system.

Started with Mikes Ultra Light and went from there.

Worked well, mostly. After 4 years I pulled it into the shop to correct some mostlys!

Mine is officially a Woodie, but it so now so sheathed in fiberglass, polyurethane and paint, that I am not sure any more!

dave

by **afreegreek** » Fri Mar 12, 2010 12:37 am

I'm looking for plans of in-swinging doors?

by **absolutsnwbrdr** » Fri Mar 12, 2010 8:39 am

afreegreek wrote:I'm looking for plans of in-swinging doors?

Unless you place your doors ridiculously high and can clear your mattress/bedding, I think that that you are going to find this is not very practical. Even if you could get it to clear your bedding, when it swings in, you will have to move out of the way of it... and there isnt a lot of room in these things!

by **bobhenry** » Fri Mar 12, 2010 9:45 am

Oh Oh were back to the pocket door idea ! :lol:

by **stomperxj** » Fri Mar 12, 2010 2:56 pm

I drew mine completely in 3D before any sawdust flew. I have almost as much time in the 3D model as I do in the trailer itself. I like to plan things out and make sure things will fit to reduce waste...

by **quadworks** » Fri Mar 12, 2010 4:09 pm

I was originally going to get plans but as time went on I drew out what I wanted. Even went as far as to make a miniture profile in cardboard. But as soon as I was ready to cut the wood plans were changed. So out the window went most of my plans and I am just running with the ideas in my head. This is only the 1st build anyways. It's the next one that will count anyways!

Teardrops n Tiny Travel Trailers

Plans ??

Who is online