Vintage Clone

Did you just design your very own teardrop or tiny trailer? Want to discuss it? Here's the place to post your design for discussion!

Vintage Clone

Postby shopfabricator » Thu Dec 11, 2008 3:10 pm

Time to start sharing build #2. I have enough done now with pictures in my album that I will be able to explain what I have in mind for this one.
I wanted something a little bigger than the PUFFIN Clone I just sold.
This one will be just under 10' long,but will still fit in the garage and be a Standy. It will have a Full Size Bed in the rear, this time it will not convert to a dinette. In Front will be a 24" Dinette for two that converts to a kid size Single Bed. In the middle will be a Fridge, Grill, Sink, A/C, and Heater. All appliances and Lights are Electric 110v Only. No Batteries, No Propane. This is truly a Camp Ground Queen. It will require full "Shore Power Support". More Surprises to come.
:) Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC

Postby Miriam C. » Mon Dec 15, 2008 8:12 am

:applause: Sounds good Gary! Time to get to making sawdust.
:designing: :question: :hammer: :pictures: :pictures: :pictures:
“Forgiveness means giving up all hope for a better past.â€
User avatar
Miriam C.
our Aunti M
 
Posts: 19675
Images: 148
Joined: Wed Feb 15, 2006 3:14 pm
Location: Southwest MO

Postby shopfabricator » Mon Dec 15, 2008 6:37 pm

Sawdust Is Flying Auntie! :thumbsup:
I've added more pics too!
Seems to be going pretty good right now in the rough-in stage. Im sure it will slow done when I get to the finishes.
Too much Fun,
Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby Steve_Cox » Mon Dec 15, 2008 7:49 pm

I like the plan Gary :thumbsup: Keep the :pictures: coming!
Steve
User avatar
Steve_Cox
4000 Club
4000 Club
 
Posts: 4903
Images: 196
Joined: Sun Apr 03, 2005 8:46 am
Location: Albuquerque New Mexico
Top

Postby shopfabricator » Tue Dec 16, 2008 2:44 pm

Another good day to be in the shop. :)
It hasn't stop drizzling all day. Just enough rain that I can't get the trailer out for pictures.
Most of the rough-ins are done! Need to go ahead and close in the lower front and epoxy seal the A/C compartment. Also need to frame the door... guess I should build a door too. Anyway, more pics are in the album!
Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby shopfabricator » Wed Dec 17, 2008 6:27 pm

Milestone! All Interior Construction is Done! :D
If it would just quit raining I could get it out of the garage and clean. It is a huge wreck with all the scrap (read small pieces for next build) and sawdust Everywhere.
Ready to start sanding, sanding, sanding, stain and poly. Still need to build the door.
Picked up plumbing and electrical supplies today, so I'm ready for that as soon as interior finish is done.... Then the Exterior!
Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby steve wolverton » Wed Dec 17, 2008 8:10 pm

That's looking good. I'm going to follow this build closely.

Is that a heater in the pic with the dog?
�veni, vidi, vici.�
User avatar
steve wolverton
1000 Club
1000 Club
 
Posts: 1676
Images: 11
Joined: Sun Nov 07, 2004 9:39 pm
Location: Brazoria, TX
Top

Postby mikeschn » Wed Dec 17, 2008 8:21 pm

...materials can no longer be purchaced at quite those prices mentioned here!


What prices would you be talking about? :o :lol: :lol: :lol:
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby Mike C. » Wed Dec 17, 2008 9:36 pm

:o Wow Gary, you don't fool around.

You are really going to town on this one.

Looks great!!!! :thumbsup: :applause: :applause:

At the speed your moving, it will be done by New Years.

Keep the pictures coming. :)
Uncle M ( Mike )
User avatar
Mike C.
our Uncle M
 
Posts: 4140
Joined: Mon Jun 18, 2007 10:13 pm
Location: Southwest, MO
Top

Postby shopfabricator » Wed Dec 17, 2008 9:38 pm

Steve- Yep :thumbsup: Its a little 110v forced air heater from the Big Blue Store. It has three jumpers in the wiring compartment to select wattage. 375, 750, 1125, and 1500. I'm pretty sure I can get by with one of the lower wattage's. Testing will tell.

Mike- Been to the Big Blue Store lately? :lol: I collect reprints of old "Building Plans" books, and they all have this disclaimer on the title page!
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby shopfabricator » Wed Dec 17, 2008 9:42 pm

:? :twisted: :twisted: All Fun and I AM Unemployed. I go by race shops all the time (when I have parts to pick up for the trailer) and still no-one hiring. Looks like I will give up on racing. Now where's my Tape Measure?
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby shopfabricator » Thu Dec 18, 2008 11:48 am

Just got back from ANOTHER parts run. Should have everything but the exterior finish now.

Anyway, I stop by a friends race shop and he said they laid off three more last week. When they applied for unemployment they were told that there are so many out of work racers that they need to take career re-training courses to maintain benefits. :shock:
THANKS NASCAR :x How are those new car rules working now! :cry:
Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Postby steve wolverton » Thu Dec 18, 2008 5:31 pm

shopfabricator wrote:Just got back from ANOTHER parts run. Should have everything but the exterior finish now.


How are you planning on finishing the exterior?
�veni, vidi, vici.�
User avatar
steve wolverton
1000 Club
1000 Club
 
Posts: 1676
Images: 11
Joined: Sun Nov 07, 2004 9:39 pm
Location: Brazoria, TX
Top

Postby Joanne » Fri Dec 19, 2008 12:01 am

shopfabricator wrote:Just got back from ANOTHER parts run. Should have everything but the exterior finish now.

Anyway, I stop by a friends race shop and he said they laid off three more last week. When they applied for unemployment they were told that there are so many out of work racers that they need to take career re-training courses to maintain benefits. :shock:
THANKS NASCAR :x How are those new car rules working now! :cry:
Gary


Yeah, we can retrain everyone for "high tech" jobs. Oh wait, we outsourced all of those jobs to India. Guess we all need to go back to subsistence farming. Sometimes it feels like we are on a super-highway to becoming a third world nation.

Joanne
New! My Camp Cooking Forum

Project Desert Dawg website


Universal Health Care
Health care with the efficiency of the Department of Motor Vehicles
and the compassion of the Internal Revenue Service.
User avatar
Joanne
Queen of Cast Iron
 
Posts: 2111
Joined: Thu Jul 01, 2004 9:43 pm
Location: Las Vegas, NV
Top

Postby shopfabricator » Sat Dec 20, 2008 9:59 am

Steve- That is one of the Surpises to come! ;)
I'll be watching your new one close too! I'm sure you've already planed on beefing up the tounge connection on your trailer. Good Frame, Just alittle light.
Gary
...materials can no longer be purchaced at quite those prices mentioned here!
User avatar
shopfabricator
Donating Member
 
Posts: 189
Images: 138
Joined: Fri Aug 24, 2007 9:51 pm
Location: Mooresville, NC
Top

Next

Return to Member Designs

Who is online

Users browsing this forum: No registered users and 5 guests