Page 14 of 17
Posted:
Thu Mar 02, 2006 5:00 pmby Miriam C.
Hi Guy.
Late huh!
Mike
Did ya mention the dementions. Get it dimentions boy, dimentions.
Framiing looks great.
Miriam (I put pictures up, sorta)
Posted:
Thu Mar 02, 2006 6:01 pmby Chip
Mike the door to the tater celler under the counter top is 21" x 10.5",,
chipper
Posted:
Thu Mar 02, 2006 10:47 pmby Micro469
Mike, I can't find the post anymore, but how is that frameless tear going that a couple were building from the internet plans? It seems very much like the ultralite, interested to see their final result...
Never too late
Posted:
Fri Mar 03, 2006 12:11 amby Guy
Dear Miriam,
Never too late! Thank you.
Posted:
Fri Mar 03, 2006 8:45 pmby mikeschn
Micro469 wrote:Mike, I can't find the post anymore, but how is that frameless tear going that a couple were building from the internet plans? It seems very much like the ultralite, interested to see their final result...
Micro,
I've cleaned up the thread and brought it back... I don't know how much more information there is on this...
http://tnttt.com/viewto ... 68075a54d1
Mike...
Posted:
Fri Mar 03, 2006 8:48 pmby mikeschn
Chip wrote:Mike the door to the tater celler under the counter top is 21" x 10.5",,
chipper
Thanks Chip...
Wow
Posted:
Fri Mar 03, 2006 8:49 pmby Guy
Dear Mike,
Geez, there was a lot of good info on that post. Didn't Madjack clean it up and repost it once before? I think it had some analysis from Andrew.
Is this the whole post as cleansed
Posted:
Fri Mar 03, 2006 8:54 pmby Guy
Posted:
Fri Mar 03, 2006 8:56 pmby mikeschn
Yes, you're right Guy, that was the thread... unfortunately, neither thread has much information....
Mike...
Posted:
Fri Mar 03, 2006 9:05 pmby mikeschn
Chip wrote:Mike the door to the tater celler under the counter top is 21" x 10.5",,
chipper
thanks Chip... have a PJ on me!!!
Mike...
Posted:
Fri Mar 03, 2006 11:28 pmby bg
Hopefully after I get back tommorrow, I'll get the doors built, throw the under carraige together, and put the skin on within the next week. Finishing the interior will be an ongoing process, but it'll be usable for cedar hill mid march.
Posted:
Mon Mar 06, 2006 10:47 amby derekxcole
I need a design for a light weight trailer that can be pulled by a compact car that is cheap and easy to build.
If you could tailor your plans to that sort of need then that would be awesome.
I Cant figure anything out so I am going to have to deal with tenting for another year.
Posted:
Mon Mar 06, 2006 11:39 amby mikeschn
Derek,
What's wrong with the Ultralight?
Mike...
Posted:
Mon Mar 06, 2006 8:09 pmby derekxcole
That was thumbs down to tenting.
Wow, the design is already done? Could I please see the link, I must of missed it.
Posted:
Mon Mar 06, 2006 9:38 pmby mikeschn
Derek,
Most of the details are in this thread... but I've gone and pulled some stuff into a document... Natually this document has a long way to go, but it's good enough to build from... (I'm building from it as we speak!)
http://www.mikenchell.com/Ultralight/ul ... design.pdf
Mike...