I want to wire my 400 watt inverter to my fuse block. Right now it has a cord that goes into a 12 volt recepticle. That's how the former owner used it. What guage wire do I use. I'm using 10 guage from the battery to the fuse block. My 12 volt system is only linked to the battery. My running lights go to the vehicle. My minimal 120 volt system is basically a power strip. trying to keep it simple. 14 guage will be used for the inside lights, galley light, and porch lights. One light to it's fuse. Ordered a grounded fuse block from Waytec, hope it was the right one. Could only tell from pictures on the forum. At this point I'm just running wires so I can finish the inside. I made a compartment in the inside front near where the battery ride on the tongue for all the connection stuff. I kind of understand basic electricity stuff.in that it makes a circut. A detailed shopping list would help, but dosen't exist. Have read and reread this section of the forum. Thanks for any help you can give me.
Mary
Mom's Nest