Capebuild wrote:Hello... I'm looking to purchase a 7 pin wire Junction box to make all my connections from TV to teardrop. I don't have any experience with this sort of thing and wondering if this looks like what I should be considering.
If there are other suggestions, other brands.....I'd be open to hear them.
Thanks!
John
Basically what we have. Ours was made by "MICTUNING"; I have no idea if there's any difference. No complaints after two trips.
I think I overdid the number of separate wires terminated on a few of the studs. (5 or 6 on the ground and on at least one other stud.) If I were to do it over, I'd lead one wire out to a separate terminal strip (our J box is in a waterproof utility compartment) and run the multiple wires to separate studs on the syrip. I replaced their nuts in the J box with the proper metric sized nylock, and they seem to have stayed tight over about 20 hours of driving so far.
Tom