Teardrops n Tiny Travel Trailers

Can anyone please tell me if it is possible and practical to have a bed in the Benroy that converts to a seat? (Or conversely a sofa that flattens into a bed?) Thanks.

Yup

Easiest option is a tri-fold futon sofa with an optional drop floor compartment.

Other people have built-in sofa mechanisms. Dusty Marks has one, I think.

Benroy is one of the best profiles for a built-in bed. Lots of headroom. Depending on how tall you are, you might consider going to a 5-ft sidewall.

Ours is a modified "benroy" design. It is 5.5' H x 5.5' W x 10' L (most extreme interior measurements). Bed is a 16" high platform, that the galley rides under. This summer I'm doing some mods and upgrades to the interior portions. The bed has two side storage areas, one 10" wide the other 16" wide and run the length of the bed. A plywood piece rides in the center section. I've now cut out a 24" wide section from the plywood bed foot area, which allows us to flip over the mattress section and turn the side areas into seats. The cut piece rotates 90 degrees and becomes a table if we want. This makes it a dinette/game table/whatever,. I'm just over 6' tall and this allows me to sit fully upright because the mattress is folded over and will be held down with straps to the side area when I finish.

I was going to make the head portion act as kind of a chaise lounge, but the rear curves are just too great to make it work well and still be comfortable, if using as a back panel, plus I'd have to make another section and I don't want to weaken the plywood section. In the meantime, and since we built it, we just use a couple of those weird looking back pillows with arms to act as a back support if watching the "tv" or reading in the camper.

I'm not quite done, probably by this weekend, and will post photos, but so far it works pretty well.

dave

Dave
I'd be very interested to see some pictures of your setup, please.

Still have a bit more work to do on it, really hot down here now and also daughter came up to visit for the day yesterday so no work on the trailer then, but I should have it all finished in a couple of days and will then post images.

dave