5 x 8 trailer tongue upgrade

Ask questions about Harbor Freight trailers, or questions about building your own...

Re: 5 x 8 trailer tongue upgrade

Postby bobhenry » Wed May 21, 2014 12:40 pm

Growing older but not up !
User avatar
bobhenry
9000 Club
9000 Club
 
Posts: 9730
Images: 2187
Joined: Fri Feb 09, 2007 7:49 am
Location: INDIANA, LINDEN

Re: 5 x 8 trailer tongue upgrade

Postby MtnDon » Wed May 21, 2014 1:12 pm

That's what I believe too.
Our 6x12 deep vee nose cargo trailer camper conversion... viewtopic.php?f=42&t=58336

We have a small off grid cabin we built ourselves in the NM mountains; small PV solar system; 624 watts PV, Outback CC & inverter/charger ... http://countryplans.com/smf/index.php?topic=2335.0
User avatar
MtnDon
1000 Club
1000 Club
 
Posts: 1797
Images: 6
Joined: Sun Aug 19, 2012 10:57 pm
Location: New Mexico

Re: 5 x 8 trailer tongue upgrade

Postby ctstaas » Thu May 21, 2015 9:27 pm

Hello All,
Andrew and KC, I agree with you both. Regardless of design or weight or tubing dimension, would you rather buy a trailer with a 1/16" tubing tongue, 1/8' or 3/16"? Would 1/4 x ? tubing be too much for a #1000 trailer 13 feet in total length? with an 8' cabin and axles at 62% of the cabin length? I am not going to do the math. I know from experience strength and durability is achieved with size, thickness, shape, design and execution.
My goal was to build heirloom strong and as light as possible. Weight equals dollars. Strong, light, cost effective. 4 x 4 x 8 #1000 Beauty for me.
Enjoy, Chris
ctstaas
Teardrop Master
 
Posts: 252
Images: 12
Joined: Sat Mar 22, 2014 4:40 am
Top

Re: 5 x 8 trailer tongue upgrade

Postby MTalon » Tue Jun 16, 2015 11:47 pm

Figured I would share my tongue extension on my NT 5x8. I used 2.5in square steel cut to about 105. The tubing was a bit thicker than needed but it sure beefed up the front end. Overall I extended the tongue about 2 feet.

The raw steel was around 40 bucks for a 10 foot section and we used a plasma cnc to cut the extra brackets we needed below the tongue.

Image

Image

Image

Image

Image

Underneath the tongue we welded a spare piece of pipe to run a bolt through for the safety chains. Not sure why we didn't just weld the top bracket and just put bolts through it but we can do that later. Just need to hit the steel with a coat or two of paint and it should be good to go.
MTalon
Teardrop Inspector
 
Posts: 22
Images: 11
Joined: Tue Mar 24, 2015 4:19 pm
Top

Re:

Postby blentz » Mon Dec 14, 2015 5:37 pm

Cliffmeister2000 wrote:Have you noticed the Northern Tool trailer is now sporting an "A" tongue?

Maybe they listened to all the complaints.

http://www.northerntool.com/shop/tools/ ... _200356494

Yes I have, the trailer I am starting has an A frame.
User avatar
blentz
Teardrop Builder
 
Posts: 41
Joined: Wed Sep 18, 2013 5:50 pm
Top

Re: 5 x 8 trailer tongue upgrade

Postby Gold5one » Wed Dec 16, 2015 6:53 pm

Good upgrades! 15 years ago, I had a 4x8 Snowbear utility trailer that I used to haul a riding mower and one day I almost missed a turn, so braked hard and started the turn at the same time-- bad idea. My single tube tongue bent about 2 feet from the ball end. With that past knowledge, I too, reinforced my Weekender XL's tongue.
"let's Make America Great Again in 2016"
Mark
Weekender-XL build journal
http://www.tnttt.com/viewtopic.php?f=50&t=61445
Image
User avatar
Gold5one
Donating Member
 
Posts: 316
Images: 87
Joined: Tue Sep 09, 2014 3:28 am
Location: Cape Coral, FL
Top

Previous

Return to Trailer and Chassis Secrets

Who is online

Users browsing this forum: No registered users and 1 guest