Bolt Size for hitch coupler?
3 posts
• Page 1 of 1
Bolt Size for hitch coupler?
by byrdz1 » Tue Apr 14, 2015 12:03 pm
Do any of you know what size bolts I need for a two inch hitch coupler? I bought a new one and am going to put it on tonight, but I forgot to see how big the bolts are, and I would like to stop on the way home, so if any of you know off the top of your head it would be a big help. I am looking for the bolts that attach the coupler to the trailer tongue.
Just Remember, no matter where you go... there you are
-
byrdz1 - Donating Member
- Posts: 339
- Images: 40
- Joined: Tue Jul 26, 2011 1:14 am
- Location: Vancouver, WA
Re: Bolt Size for hitch coupler?
by halfdome, Danny » Tue Apr 14, 2015 12:59 pm
byrdz1 wrote:Do any of you know what size bolts I need for a two inch hitch coupler? I bought a new one and am going to put it on tonight, but I forgot to see how big the bolts are, and I would like to stop on the way home, so if any of you know off the top of your head it would be a big help. I am looking for the bolts that attach the coupler to the trailer tongue.
I just measured mine at 1/2" x 4".
Depending on the width of your draw bar you may need steel shims.
If available go with grade 5 or 8 nuts and bolts.
Danny"Conditions are never just right. People who delay action until all factors are favorable do nothing". William Feather
Don't accept "It's Good Enough" build to the best of your abilities.
Teardroppers Of Oregon & Washington
-
halfdome, Danny - *Happy Camper
- Posts: 5883
- Images: 252
- Joined: Sun Aug 14, 2005 11:02 pm
- Location: Washington , Pew-al-up