I am starting a build, and will either use an aluminum NT trailer or directly bolt Flex Ride half axles to a torsion box floor. I have a HF folding trailer that bounces, even with several hundred pounds of weight. I am concerned with a light weight build the NT trailer will bounce with the leaf springs. In addition the general quality of the trailers is not the best. I am considering just bolting Flex Ride axles directly to the torsion box floor. I like these because of the height adjustability. This cost will be similar for both, but I assume the bearings will be better in the Flex Ride hubs, and I can purchase radial tires.
Any thoughts?
Russ