by chorizon » Thu Feb 28, 2008 1:03 pm
I just wanted to say Angib did an excellent job of modelling my tear on his website. I "borrowed" it, checked it against my Kuffel Creek plans, and his .dxfs were spot on. I tweaked it a little (of course) to suit my needs. Tomorrow's the big day, I'm going to cut the sides, doors, and hatch spars out on our Amada 3000W laser. I'll try and get some pics of the machine in action. If anyone's interested in my modded .dxfs, just let me know. I'm having to use 4X8 plywood for the sides, so their will be a "scarf" joint where the two halves meet, as the sides are 10' long.