5x8 conversion new photoes

Converting Cargo Trailers into TTTs

5x8 conversion new photoes

Postby Camper » Mon May 31, 2010 11:24 pm

Here is my current progress on my trailer conversion.Thanks for all the ideas that have been posted are very helpful.
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho

Re: 5x8 conversion new photoes

Postby d30gaijin » Sat Jun 12, 2010 9:42 pm

Camper wrote:Here is my current progress on my trailer conversion.Thanks for all the ideas that have been posted are very helpful.


Newbie here and also a fellow Bosiean but I see no photos of your progress/build (unless I am really missing something). I'm interested in your conversion/build in that I am just starting a 6'X10' cargo trailer conversion myself.

Hope to hear and see more of your conversion as it progresses.

Don
User avatar
d30gaijin
Titanium Donating Member
 
Posts: 594
Images: 139
Joined: Sat Jun 12, 2010 9:27 pm
Location: Boise, Idaho

Postby Camper » Sun Jun 13, 2010 11:23 am

Hello Don
Thankyou for your response.Glad to know there is another builder nearby.On the page where i wrote about my build at the bottom it should say gallery right next to profile.Click there and my photos should pop right up.You will see my trailer is an open trailer that i am enclosing to make a cargo/camper trailer.
Let me know if you are able to find them.Have a great day!!!
Derrick :thumbsup:
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Postby Camper » Sun Jun 13, 2010 11:25 am

Hey Don actually it should say Album
Derrick
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Postby pete42 » Sun Jun 13, 2010 7:28 pm

Nice job so far is there a way to view photos in someones Album in a slide show?

I really enjoy seeing everones photos either way but I like them best when attached to the post
User avatar
pete42
Super Lifetime Member
 
Posts: 2203
Images: 13
Joined: Sat Nov 07, 2009 11:52 am
Location: SouthWest Ohio
Top

Postby Curtis in Texas » Sun Jun 13, 2010 9:49 pm

Nice job Camper.
I kicked around that same concept last year for my 16' rail trailer. Then a 17' Cargo Trailer fell into my lap.

Looks like you've done wood working before.

Gonna watch your build for sure.
Curtis in Texas
Teardrop Advisor
 
Posts: 51
Joined: Thu Aug 06, 2009 5:18 pm
Top

Postby Camper » Sun Jun 13, 2010 11:09 pm

I have downloaded the latest photos of my progress.
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Skills

Postby ho-do » Mon Jun 14, 2010 6:15 pm

You have a heck of a lot more carpentry skills than I do!! Great job!!
ho-do
Teardrop Builder
 
Posts: 46
Images: 18
Joined: Wed May 26, 2010 2:23 pm
Location: Harvest, Alabama
Top

Postby d30gaijin » Mon Jun 14, 2010 10:17 pm

Camper,

Thanks for the clarification. I found the photos. Wow! what a nice build! You, Sir, have talent! Me? I am a hacker working my way through a 6x10 cargo trailer conversion.

Best regards,
Don


Camper wrote:Hello Don
Thankyou for your response.Glad to know there is another builder nearby.On the page where i wrote about my build at the bottom it should say gallery right next to profile.Click there and my photos should pop right up.You will see my trailer is an open trailer that i am enclosing to make a cargo/camper trailer.
Let me know if you are able to find them.Have a great day!!!
Derrick :thumbsup:
:worship:
User avatar
d30gaijin
Titanium Donating Member
 
Posts: 594
Images: 139
Joined: Sat Jun 12, 2010 9:27 pm
Location: Boise, Idaho
Top

5x8 conversion update

Postby Camper » Sun Jul 18, 2010 11:22 pm

Well i heve not had a lot of time lately to work on my conversion.I have however completed the plywood install on the exterior and interior.We installed the vinyl floor.We were going to put in sheet vinyl but decided to go the cheaper route with 12x12 tiles.Turned out great.I was able to find a nearly brandnew ac unit also for the trailer.I will post current pictures in a few days.
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Progress

Postby Camper » Fri Jul 23, 2010 10:11 am

Here is my current progress.It is starting to come along now.Next i will prime the outside of the trailer.
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Re: Progress

Postby d30gaijin » Fri Jul 23, 2010 8:09 pm

Camper wrote:Here is my current progress.It is starting to come along now.Next i will prime the outside of the trailer.


Camper,

Your conversion/build is looking great! :thumbsup:

A question about your air conditioner install since I am considering installing a similar unit in my CT conversion: Do you plan to leave it hanging out the side and, if so, does it protrude past the width of your fenders? If not I suspect there should be no problem. I have 10" wide fenders on my CT and was hoping that whatever household window type AC unit I go with doesn't protrude beyond the fenders so that I am not likely to bash it against something if backing into a tight space (I am terrible at backing a trailer). My options are limited as to where I can install the AC unit in my CT, one side or the other seems the likely choice. Installing on the front of the trailer is out as that seems a perfect route for water to intrude should I be caught hauling it in a rain storm and the rear is out since that's where the main doors are, I don't want to mount it on a door as I need the rear doors operational to get my Harley in and out.

Again, your conversion/build is looking great! :beer:

Don
User avatar
d30gaijin
Titanium Donating Member
 
Posts: 594
Images: 139
Joined: Sat Jun 12, 2010 9:27 pm
Location: Boise, Idaho
Top

Postby Camper » Fri Jul 30, 2010 11:11 pm

Here is my current progress on my conversion also not pictured is the completed roof vinyl that i installed will post photo soon.
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Postby d30gaijin » Sat Jul 31, 2010 11:52 am

Camper wrote:Here is my current progress on my conversion also not pictured is the completed roof vinyl that i installed will post photo soon.


Derrick,

Wow! Your build is really coming along. It looks great!

What kind of vinyl did you use for the roof? Post a pic of it when you get the chance.

Don
User avatar
d30gaijin
Titanium Donating Member
 
Posts: 594
Images: 139
Joined: Sat Jun 12, 2010 9:27 pm
Location: Boise, Idaho
Top

conversion

Postby Camper » Sat Oct 02, 2010 1:32 am

Am back with an update on my conversion
Camper
Teardrop Builder
 
Posts: 30
Images: 34
Joined: Wed Sep 23, 2009 5:23 pm
Location: Boise Idaho
Top

Next

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 17 guests