Spent some time designing interior cabinets to put my helmets and other gear into. They will mount up tight to the ceiling behind the windows on each side. I struggling to finalize a size, until I started to look for premaid - unfinished cabinet doors, my cabinet size was sort of predetermined by the size doors I could buy.
I wrote down all the door sizes from my local Menards store, then back home and back to the drawing board.
I found the13 x 16 raised panel doors would work for both cabinets I wanted to build.
I built the left side cabinet with the 16 inch side going horizontal. The right side cabinet has the 13 inch side going horizontal. So one is longer than the other. My windows are not straight across from each other, so the available space is different.
All the wood is solid oak. The side panels are 3/4 oak veneer plywood.
I used a Kreg pocket screw jig for all my fasteners. Every edge is glued and screwed.
I stained them with my matching stain, then sprayed one coat of Poly for the top coat.
I'm sorry to say I have build pictures tonight, but I will not get the cabinets hung in the trailer until later this week.
Here is the right side cabinet.
One coat of stain and one coat of spray poly.