by MtnDon » Sun Apr 30, 2017 2:41 pm
3M 30NF Fastbond contact adhesive on the wall and ceiling surfaces. It is non flammable and has less toxic fumes to the user. It can be brushed or rolled on; I rolled most of it, using a brush only in hard to get at corners. It tends to soak into cloth a lot though so I used the 3M spray can on the material backing. I used what is known as hull-liner, not regular carpet. Hull-liner is like an indoor / outdoor carpet but does not have the rubber backing like carpet.
The 30NF is much nicer to use inside confined spaces. The solvents in the standard contact cements are too dangerous for my liking. I sprayed the material in the garage, on the floor over cardboard, with doors open.