New 30' cargo trailer ordered for RV conversion

[Old Hippie]

It's being built by Synergy in Georgia and I should have it in 4 to 6 weeks. I don't know if I can stand the wait!

Old Hippie

[Iconfabul8]

Looking forward to the build. Waiting is definitely not fun, but it does give you time to plan and buy lots of fun stuff!!

[flboy]

Wow, that is a large trailer. Best of luck with the build.

Sent from my SM-G935P using Tapatalk

[SalsaDog]

That is a long trailer indeed. That length is going to make forest roads, BLM roads, downtown streets, city parking and mountain switch back corners a challenge to say the least. Remember, the best boondock/camping is on the worst roads.

[John61CT]

Yes I think 20', dimensions of a cargo container, is about my limit.

Wish I was shorter so a sideways bed could go in a 7' wide, think I'll need 7.5.

[aggie79]

I too am looking forward to your build!

[flboy]

Yes I think 20', dimensions of a cargo container, is about my limit.

Wish I was shorter so a sideways bed could go in a 7' wide, think I'll need 7.5.

Yes, a 7 ft wide CTC gets you barely wider than 6 ft for a bed on the interior. After the walls, interior hardware and the gap needed for movement, barely 6'2 for the bed length. In my case, I just make it under that by two inches so okay.

Sent from my SM-G935P using Tapatalk

[McDave]

Yes I think 20', dimensions of a cargo container, is about my limit.

Wish I was shorter so a sideways bed could go in a 7' wide, think I'll need 7.5.

Hmmm... I've never wanted to be shorter, but I wouldn't mind being less big around. Just sayin'...

McDave

[Hader]

Our 1st was a 32' Whale.
We used it for work/living in remote locations, and then converted it to a food trailer.

[m.colley]

It's being built by Synergy in Georgia and I should have it in 4 to 6 weeks. I don't know if I can stand the wait!

Old Hippie

Congrats. My CTC is a Cynergy 7x16 the "Advanced" model. Are you picking it up at the factory or buying thru a local dealer? The reason I ask is make sure your running/parking lights work before you leave. Its the one problem I had with mine that I had to fix by not checking my lights before leaving my dealer. The run/parking lights on the trailer were causing a fuse to pop/blow. The problem was in the lights mounted at the fender. When they drilled a hole thru the trailer sidewall they didn't use any grommets. As the wire passed thru it got nicked on the "hot side". It was blowing even a 20A fuse. It took a while to find the culprit.

Other then that I like the trailer and would buy another Cynergy built unit...



Martin