Karebru's 7x16 Build Log

Converting Cargo Trailers into TTTs

Re: Karebru's 7x16 Build Log

Postby McDave » Sun Mar 10, 2019 2:13 pm

Lookin great!

McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana

Re: Karebru's 7x16 Build Log

Postby Karebru » Fri Mar 22, 2019 4:35 pm

Thanks, McD! :thumbsup:
A few more pictures...

The bathroom door on sliding "barn door" hardware.

Image

Electrical closet door.

Image

And just because... Soggy Bottom Sadie and some of my current flock.

Image

I've had my baby Sadie for all of her 13-1/2 years. Been keeping a small chicken flock of various breeds for about 35. :)
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida

Re: Karebru's 7x16 Build Log

Postby flboy » Fri Mar 22, 2019 7:58 pm

Such nice work! It looks great! :applause: :applause: :applause:


BTW... do you get eggs and etc. from the chickens or are they just pets?
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4218
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Fri Mar 22, 2019 9:42 pm

flboy wrote:BTW... do you get eggs and etc. from the chickens or are they just pets?

Thanks, Don.

Pets that provide eggs.

And in a pinch... Prepper meals on the hoof.
I've butchered a few over the years, but to me, it's just too much work, when Publix is right down the road.
The same goes for rabbit. After filling the freezer, I have six left that I continue to feed... My original breeding stock.
IMO, rabbit doesn't taste like chicken. Chicken actually has flavor.
Chickens are entertaining too. Rabbits just sit there and glare at you. :SH
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby McDave » Sat Mar 23, 2019 12:14 am

Hey Karebru,
Wow! That is some kind of beautiful woodworkin'. That's just my style as well. Pretty sure I was born in a barn, but I think I could live in one and be pretty darn happy. The wife, not so much.... So anyways, I have a sliding "pocket door" in my trailer similar to your bath door. I reused an old door from the Ice Room in our house. It's 125 yrs old but I can't toss stuff like that. Just be sure you have a way to pin that slider or it will beat the hell out of itself and anything in the area when you travel. Ask me how I know... :oops:
Again, these are not great pics but you can get the idea

Before install
143608
After
153931

McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Sat Mar 23, 2019 8:33 am

I love it! Sounds like you have an interesting house.
I like your 'decor" too. Old Winchester?
I've been thinking about something like this for a latch. A notch in the arm that drops over the keeper, and it would work for a slider.
I've seen them on cabin doors and always thought they were cool.

Image

I wasn't born in a barn, or on a farm, but barns, pastures, and corn fields were my playground as a kid.
I grew up in a neighborhood surrounded by northern Illinois dairy country. This was the view out my bedroom window...

Image

I guess it's still in my heart........ :thinking:
Probably explains all these damn animals. :roll:
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Wed Apr 10, 2019 8:02 pm

For the sake of keeping my thread going...
Not a whole lot going on these days. Temporary downtime at work.
Why does it always have to be either, No time to work on it, or plenty of time to work on it, but no money to spare for materials? :shrug:
I've been working on odds and ends with the lumber that I already have. I have my drawer boxes built and have run some of the trim, but I need finishing lacquer so that I can permanently install the cabinets. Which I need to do before fitting the trim. I also need to buy drawer slides.
I've also been working on an enclosure for my porta-potty, that I'll post a picture of when it's finished.

Here's the trim on one of my windows.
The countersunk screws will get wooden plugs, once they're finished and permanently installed.

Image
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby featherliteCT1 » Thu Apr 11, 2019 5:30 pm

That window trim looks great!
featherliteCT1
1000 Club
1000 Club
 
Posts: 1124
Joined: Wed Dec 28, 2016 6:54 am
Location: Southern Indiana
Top

Re: Karebru's 7x16 Build Log

Postby McDave » Fri Apr 12, 2019 8:53 am

No doubt! Your skills are showing, again!

McDave
User avatar
McDave
Donating Member
 
Posts: 2288
Images: 412
Joined: Sun Jan 25, 2015 5:21 am
Location: Tiny Town, Montana
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Fri Apr 12, 2019 2:16 pm

Potty enclosure...
It's a close fit so it won't tip on the road.
The board across the front at the bottom lifts out for servicing, so I can slide the toilet far enough forward to reach the latches that hold the top (water tank) to the bottom (holding tank)

Image

It really fills up the little bathroom, :o
but there's still enough leg room to sit, or to stand at the sink. :thumbsup:

Image
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby John61CT » Fri Apr 12, 2019 9:08 pm

man that's gorgeous

almost a shame to use a store-bought plastic dunny, could've DIY and it would have looked even better
John61CT
1000 Club
1000 Club
 
Posts: 1958
Joined: Thu Nov 17, 2016 4:36 pm
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Fri Apr 19, 2019 8:55 pm

John61CT wrote:man that's gorgeous

almost a shame to use a store-bought plastic dunny, could've DIY and it would have looked even better

Thanks.
Wow. A DIY head? :thinking:
Interesting idea... Fun to think about, but......
Some things are just easier to buy, and a whole lot less expensive in the long run.
Been there. Done that. ;)
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby Karebru » Thu May 16, 2019 9:16 am

Wow! I just looked at my starting date and it's been over a year.
Other duties have been calling lately, so I'm on an extended break.
I always hear the call of the sea around this time of year. That's part of it.
My new goal is, camping in the fall...
Seems like I said that a year ago. :R
I'm not going outside until the temperature is above my age.
User avatar
Karebru
The 300 Club
 
Posts: 319
Joined: Sun Sep 09, 2012 9:33 am
Location: The eastern woods of Southwest Florida
Top

Re: Karebru's 7x16 Build Log

Postby flboy » Sun May 26, 2019 10:53 am

You have built one fine camper! You are craftsman with some outstanding woodworking skills for sure. Enjoy the camping!
Don (Flboy)

YouTube Video of Finished 6x12 Trailer:
https://youtu.be/6_-8cVdWUIA
YouTube Video of 7*18 with 2ft V-nose Trailer:
https://youtu.be/MUcMM86LA2g
User avatar
flboy
Gold Donating Member
 
Posts: 4218
Images: 378
Joined: Tue May 15, 2012 6:13 pm
Top

Re: Karebru's 7x16 Build Log

Postby Rainier70 » Sun May 26, 2019 3:09 pm

Outstanding work! :applause: :thumbsup:
User avatar
Rainier70
1000 Club
1000 Club
 
Posts: 1083
Images: 244
Joined: Wed Jan 30, 2013 4:35 am
Location: Southeast Idaho
Top

PreviousNext

Return to Cargo Trailer Conversions

Who is online

Users browsing this forum: No registered users and 11 guests

cron