How are you sourcing/getting metal trim?

[cg_ops]

As I look at the builds on here and on mfgr websites it looks like the ATP and/or metal trim is always done so well! I suck at making clean cuts on wood so I'm even more nervous at the idea of cutting/bending finishing metal work. So, I'm wondering how you guys did it or if you just took your trailer to a fab/metal shop.

For example, my trailer will arrive like this https://i.imgur.com/QisvOSs.jpg
(credit to Trick from this thread viewtopic.php?f=42&t=70738)

I would like to add a nice flooring to it and add ATP or aluminum/steel trim to make it look clean, like this image (specifically the trim around the ramp and to a lesser extent the floor along the wall) .

Thank you guys. I really appreciate how helpful you all are!

Cheers!

[McDave]

Hey cg_ops,
For the flooring I used this product from Home Depot. I have been really happy with it for 2-3 yrs now. Holds up to the Harley traffic and cleans up easy. Hard to beat the price.
https://www.homedepot.com/p/HDX-7-5-ft- ... /205442047

For the metal trim I know there is a place to order that from but I'll have to go back into the archives to find it. You might try to google ATP trim or trailer trim? I'll see what I can find for you.

McDave

[McDave]

Here's a place to get you started.
https://www.cutsmetal.net/

McDave