Is there any problem with charging one battery using a PWM controller from a first solar panel and an MPPT controller from a second solar panel, where the first solar panel is not connected to the second solar panel, where both controllers are connected to the single battery, and where the PWM controller is connected to a battery monitor that controls the PWM charge parameters?
I tried to research this question but found conflicting opinions. Some say that the MPPT controller could be confused (e.g., by the pulsing from the PWM controller) or be confused for some other reasons.
Specifically, the PWM controller would be a Bogart SC 2030, the battery monitor would be a Bogart Trimetric, and the MPPT controller would be a CTEK D250S
Thanks in advance.