While at harbor freight I decided to grab a pry bar for the stabilizer jacks.
I've been using a 9" flatblade screwdriver with success but.... was always worried I'd break the handle off.
I needed something 1/2" in diameter and I cut it down to 18" length.
Using a soft disc grinder , I rounded off the square edges and flatbladed the end.
What a huge difference and much more safer. Leveling side to side is much better.
Shoulda done this a long time ago.
Spent a weekend doing some urban winter camping and enjoying the wood stove.
https://youtu.be/Xso2ouC0nh8?si=UHYyb7XUCvsQOTHSAlso having the trailer in the shop has made bugging out much faster. With just a little bit of snow outside made moving the trailer by hand a huge task.
Sent from my SM-A115AP using Tapatalk