I started a build in Mo

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

I started a build in Mo

Postby WayneFromMo » Fri Jul 17, 2009 10:46 pm

Well I started my build here is a few pictures.

Image
Here I'm trying to square the frame.
Image
Here is the trailers top side.
Image
Trying to show the frame with an axel.

The following is how I used a car jack for a stablizer jack.
Image
Image
Image
Image
Last edited by WayneFromMo on Thu Nov 12, 2009 9:05 pm, edited 3 times in total.
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri

Postby devigata » Sat Jul 18, 2009 10:04 am

Looks like you have a sturdy base to start with. Keep the pics coming!

What is your favorite profile?
User avatar
devigata
Donating Member
 
Posts: 282
Images: 82
Joined: Sun Apr 13, 2008 12:01 pm
Location: Orlando, Florida

Postby WayneFromMo » Sat Jul 18, 2009 2:02 pm

I finished the prep on the Frame and painted it.

Image

Image

Image

Do I need the axel overslung or underslung? My hubs fit 14" Wheels.
Last edited by WayneFromMo on Wed Oct 14, 2009 9:28 pm, edited 3 times in total.
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby WayneFromMo » Sat Jul 18, 2009 2:28 pm

I Guess I could use a little help on picking a layout. In both profiles I put every thing I needed in first and then worked on the outside.

Image

This is Profile #1. In this profile I cannot use the large window in the rear.

Image

In this profile I can use a large window that I salvaged from a wrecked RV.

Which profile should I use?
Last edited by WayneFromMo on Sat Jul 18, 2009 5:36 pm, edited 2 times in total.
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby mikeschn » Sat Jul 18, 2009 3:34 pm

Good looking frame. What's next, the side profile? What flavor are you thinking?

Oh and welcome to the forum!

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby WayneFromMo » Sat Jul 18, 2009 5:19 pm

Thanks, As far as flavor, I like to keep it simple. I feel it's easier to maintain. I wanted to build a Winter Warrior, but I couldn’t keep it from gapping or binding up in my PRO E. Plus I needed a little more room for my hunting gear and a full size bed. I like the looks of the Benroy TD. I also like the looks of the T@B and R-POD campers. I also was lucky enough to pick up a large window out of an RV. I was maybe hoping to use it. Those windows cost a lot of money new. So I was looking for an experienced opinion on the design. I believe I can still build either one.
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby mikeschn » Sat Jul 18, 2009 5:52 pm

If you want an opinion, go for a curved profile... it's stronger, easier to seal, and looks good.

;)

Mike...

P.s. here is the beginnings of my mini tab design...
Image

Image
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Postby WayneFromMo » Sat Jul 18, 2009 6:32 pm

I've been reading your thread for the T@B, made your mind up on how to build the trim?

Do you think I need to have the axel under the spring or on top of the spring. I'll be using 14" wheel and tires? I'm thinking of putting the axel under the spring it may ride better with my truck.
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby mikeschn » Sat Jul 18, 2009 6:35 pm

I'm planning on using a torsion axle to get it as low as possible.

If changing your axle is not an option, put the axle above your springs to get it lower.

Mike...

P.S. No, I've not decided anything on the trim yet.
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

mini T@B link????

Postby John T. Hodgen » Sun Jul 19, 2009 8:18 am

Hey Mike,
I must of missed this new build that you have going on with the mini T@B profile. could you pm it to me, many thanks.
Til later by the fire--John T. 8)
User avatar
John T. Hodgen
The 300 Club
 
Posts: 415
Images: 8
Joined: Thu Jul 24, 2008 5:50 am
Location: Summersville, West Virginia
Top

Postby aggie79 » Mon Jul 20, 2009 8:24 am

:applause: :thumbsup: :applause: Nice job on the frame Wayne. I can't wait to see how your build progresses. Keep the pictures coming.
Tom (& Linda)
For build info on our former Silver Beatle teardrop:
Build Thread

93503
User avatar
aggie79
Super Duper Lifetime Member
 
Posts: 5405
Images: 686
Joined: Tue Aug 07, 2007 5:42 pm
Location: Watauga, Texas
Top

Postby WayneFromMo » Sun Aug 02, 2009 7:45 pm

I framed the floor this weekend. I also managed to seal it. I'm not too worried about the floor. I framed it with pressure treated wood.

So I'll wait for the sealer to dry, flip it over, and bolt down it next week.

8)

Image

Image
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby WayneFromMo » Mon Aug 03, 2009 12:12 pm

Well I'm running into a material problem. I have been looking for some 1/8" thick plywood to use on the outer skin. My plan was to layer it to 1/4" thick. I've called around to trying find some 1/8" thick plywood, no one has any to offer and sale.

So my question is can 1/4" be bent to fit a 24" raduis? If so how would you go about doing so. I have a few toughts, but I would like to hear yours first.

If I cannot find any 1/8". I will have to change my design. :)
The only thing keeping anyone from being a genius is motivation- Albert Einstein
My build
http://www.tnttt.com/viewtopic.php?t=31105
User avatar
WayneFromMo
Teardrop Master
 
Posts: 134
Images: 92
Joined: Thu Jun 11, 2009 7:22 pm
Location: Poplar Bluff Missouri
Top

Postby chief5 » Mon Aug 03, 2009 4:52 pm

You could cover the radius 'ed area with strips resawn on a bandsaw to 1/4" thick. Bead and cove the edges for a tighter fit. Search "Cedar strip canoe" To use less strips, you could use 1.5 inch material to resaw.
chief5
Teardrop Builder
 
Posts: 39
Images: 2
Joined: Wed Jul 20, 2005 10:45 pm
Top

Postby mikeschn » Mon Aug 03, 2009 5:17 pm

I have bent 1/4" plywood over a 24" curve, but it's tough. Best to wet it a little bit... errr... make that "a lot"...

Image

BTW, the nailer didn't work. The nails pulled right thru the plywood. We ended up using roofing nails and a hammer...

Image

I guess I'm fortunate to live near a large city. When the plywood place in Pontiac no longer carried the plywood I wanted, I just called down to a place in Detroit, and had them deliver what I wanted.

Of course, if the place in Detroit no longer sells it, then I'll have to go to Boulter Plywood, just like many of the guys here have done...

http://www.boulterplywood.com/

It might cost a little more than buying it locally, but you'll get exactly what you want.

Mike...
The quality is remembered long after the price is forgotten, so build your teardrop with the best materials...
User avatar
mikeschn
Site Admin
 
Posts: 19202
Images: 479
Joined: Tue Apr 13, 2004 11:01 am
Location: MI
Top

Next

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 17 guests