Wanderlust Build Thread - Updates after two years!

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Sun Aug 05, 2012 10:22 am

One last little addition. I purchased this panel for the new trailer, but since that is not ready, it will be used for this trip.

Image

80 Watts of power, should keep me topped off with my minimal use of electricity.
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey

Re: Wanderlust Build Thread - Updates after two years!

Postby ieheg2 » Sun Aug 05, 2012 2:13 pm

Paul, what you want to connect to a solar panel? Or just charge the battery ...
:thinking:
Treat people the way you want, that would treat you.
User avatar
ieheg2
Teardrop Builder
 
Posts: 33
Images: 57
Joined: Tue Mar 23, 2010 6:35 pm
Location: Tomsk. Russia.

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Sun Aug 05, 2012 4:03 pm

ieheg2 wrote:Paul, what you want to connect to a solar panel? Or just charge the battery ...
:thinking:


It is just to recharge my battery. I have a fantastic fan which uses most of the power if it's hot. I don't use the lights much, but sometimes I'll recharge my cellphone or tablet from the trailer, so this should keep my battery near full all the time!
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby Kornbread » Sat Aug 11, 2012 6:00 pm

I just read the build journal for the wanderlust.

I was supposed to start my build today but Mother Nature had other plans. So I've been browsing the build journals here to pass the time.

I'm very impressed with your build. The graphics really make it look great. The new door is awesome! Mind if I ask where you got it?

Mitch
User avatar
Kornbread
Teardrop Inspector
 
Posts: 11
Joined: Tue Jul 10, 2012 10:45 am
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Sat Aug 11, 2012 6:22 pm

Mitch, thanks for the compliments. I bought the door on ebay. It was very pricey at 240.00 but I'm using the trailer enough to justify it in my eyes.
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby Forrest747 » Sun Aug 12, 2012 10:09 am

Paul with all the issues I had building my own doors I would buy doors next time. Gets some nice ones from Vintage tech. See ya later this week
"All the success on the trail can not compensate for having square headlights"

"I've got a fever and the only prescription is more cowbell!"
http://www.tnttt.com/viewtopic.php?f=50&t=37701 Build Journal
User avatar
Forrest747
Cowbell Donating Member
 
Posts: 1327
Images: 447
Joined: Mon Apr 06, 2009 3:40 am
Location: West Valley Utah, Utah
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby NightCap » Sun Nov 11, 2012 5:18 pm

Your build has some features that mine is going to have. Thanks for having a great picture album.
Image
#1 - 100% Done #2 - 100% Done Thinking about #3
User avatar
NightCap
1000 Club
1000 Club
 
Posts: 1131
Images: 259
Joined: Sun Jul 02, 2006 9:28 pm
Location: Iowa, Dayton
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby Irving » Tue Mar 12, 2013 7:05 pm

What type of body filler did you use for this build? Also what was it that you coated the underbody with? Very well made travel trailer. Just browsed through the whole thread. How has your acrylic enamel finish been holding up?
Irving
Teardrop Master
 
Posts: 126
Joined: Mon Mar 04, 2013 4:27 am
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Tue Mar 12, 2013 8:19 pm

Irving wrote:What type of body filler did you use for this build? Also what was it that you coated the underbody with? Very well made travel trailer. Just browsed through the whole thread. How has your acrylic enamel finish been holding up?


Honestly I don't remember what brand body filler I used. I just grabbed a damaged can from our defect room and used that since it was free. Probably a U.S. Chemical or Fibreglass Evercoat filler (lightweight). The undercarraige was done with Evercoat 1348 aerosol undercoating, and the paint is holding up fantastic. My only error was not taping the joints with fiberglass tape before the polyester resin was applied.

I am very happy with how it's holding up.
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby Irving » Wed Mar 13, 2013 10:38 am

parnold wrote:
Irving wrote:What type of body filler did you use for this build? Also what was it that you coated the underbody with? Very well made travel trailer. Just browsed through the whole thread. How has your acrylic enamel finish been holding up?


Honestly I don't remember what brand body filler I used. I just grabbed a damaged can from our defect room and used that since it was free. Probably a U.S. Chemical or Fibreglass Evercoat filler (lightweight). The undercarraige was done with Evercoat 1348 aerosol undercoating, and the paint is holding up fantastic. My only error was not taping the joints with fiberglass tape before the polyester resin was applied.

I am very happy with how it's holding up.


Has omitting the fiberglass tape over joints had some type of ill effect?
Irving
Teardrop Master
 
Posts: 126
Joined: Mon Mar 04, 2013 4:27 am
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Wed Mar 13, 2013 10:59 am

On the corners or edges, I see not ill effect at all, but in the center of the roof, where two flat panels butt up against each other, a hairline crack appeared. I see no indication that water was getting in, but I covered the entire roof in a flexible "chip guard" anyway, and then painted over that as it was not UV resistant.
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby ae6black » Mon Jan 01, 2018 2:18 pm

Thanks so much for posting! This is exactly what I was looking for. A project like this is now on my to do list.

Art
User avatar
ae6black
Silver Donating Member
 
Posts: 342
Images: 19
Joined: Sat Jul 19, 2014 4:13 am
Location: Western Pennsylvania
Top

Re: Wanderlust Build Thread - Updates after two years!

Postby parnold » Mon Jan 01, 2018 2:57 pm

Thanks for the compliment!

You might be interested in the fact that I plan on selling this trailer this spring. I recently gained a grandson, so I purchased a trailer that's a bit bigger so that my son and grandson can camp with me.
User avatar
parnold
Donating Member
 
Posts: 2344
Images: 302
Joined: Mon Feb 08, 2010 4:49 pm
Location: Northwest New Jersey
Top

Previous

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 10 guests