Y-Knot Standee Build!!!

[Bilko1448]

After being a member for a few years now, I am finally building a standee. I had planed on building the frame but came across this pop up frame with torsion axle for a song. Here are a couple pics of the wheel wells I was working on today.

[rainjer]

Can you reduce you picture sizes and repost them? I am on a 22" wide screen and they require my to scroll to view them. Try 640 X 480 resolution.

Jeremy

[Bilko1448]

Sorry I hadn't re sized them when I uploaded to tiny pic. I have fixed them now.

[doug hodder]

Looks like you have plenty of frame...what size are you building? Doug

[Bilko1448]

Doug, yes there is definitely a lot of trailer there It will be 6 foot 4" wide and 11 foot 10" long! I would have built a lighter frame but I saved a ton of money using this one. It will not hold a candle to your build but I am going to try my best!!

[Bilko1448]

I worked on boxing in one fender today, I didn't get much done but its a step closer. I am using galvanized metal from an old furnace duct. When it is done I will spray them with under coating. I still need to add a piece to the top!