"The X-Cubed" C.T.T.

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: "The X-Cubed" C.T.T.

Postby Sparksalot » Fri Feb 09, 2018 2:47 pm

This million year old pic shows the VIN plate location on my frame. Right there on the tongue. That's the only reason I haven't changed it yet.

34362
You don't know the power of the Dork Side.

The Compass Rose build thread
viewtopic.php?t=23213

Inspiration
http://tnttt.com/Design_Library/Trailer%20for%20Two.htm
User avatar
Sparksalot
Silver Donating Member
 
Posts: 1155
Images: 521
Joined: Fri Feb 15, 2008 9:36 pm
Location: Texas by God (TX, Buda, TX)

Re: "The X-Cubed" C.T.T.

Postby working on it » Sat Feb 10, 2018 2:27 pm

Sparksalot wrote:This million year old pic shows the VIN plate location on my frame. Right there on the tongue. That's the only reason I haven't changed it yet.

34362
  • I wouldn't have changed mine either, but it was damaged and unreadable. When I replaced the original damaged single-beam tongue, with a much thicker and longer piece of square tubing, I just threw it away. I showed a picture, saved on my phone, of the disposed of VIN label, and a previous license plate sticker (from many years prior) to the Tax office clerk, and re-registered without problems.
  • 86925 old tongue (with VIN label), both damaged and disposable!
  • 86928 new tongue, without VIN label, but OK with the State
  • If I ever go to Harbor Freight again, I might pick up a set of their number/letter stamping dies, just to make it "identifiable", as if its' unique self, is not. Just for the sake of the govt. sanctions for ownership.
  • HF number & letter stamping set.JPG
    HF number & letter stamping set.JPG (69.19 KiB) Viewed 259 times
2013 HHRv "squareback/squaredrop", semi-offroad, 4x8 TTT, 2065 lbs
  • *3500 lb Dexter EZ-Lube axle, w/brakes, 3000 lb. springs, & active-progressive bumpstops
  • *27x8.5-14LT all-terrain tires (x 3) *modified Weight Distribution system for single-beam tongue
  • *LED lighting, triple fans, Pioneer stereo *A/C & 110vac heat, Optima AGM, inverter & charger(s)
  • *extended-run, on-board, 2500w generator *Coleman dual-fuel stove & lantern, Ikea grill
  • *zinc/stainless steel front racks *96"L x 6"Dia. rooftop fishing rod/reel carrier
156212148599156215
User avatar
working on it
1000 Club
1000 Club
 
Posts: 1779
Images: 449
Joined: Tue Oct 04, 2011 9:05 pm
Location: DFW Texas

Re: "The X-Cubed" C.T.T.

Postby absolutsnwbrdr » Mon Feb 12, 2018 6:49 am

Sparksalot wrote:This million year old pic shows the VIN plate location on my frame. Right there on the tongue. That's the only reason I haven't changed it yet.

34362


Oooh that must be an older Northern Tool Folding Trailer kit? I think they have just a solid center member now.
Zach

ImageImageImage
User avatar
absolutsnwbrdr
Donating Member
 
Posts: 2632
Images: 410
Joined: Mon Jan 25, 2010 6:10 pm
Location: Hanover, PA
Top

Previous

Return to Build Journals

Who is online

Users browsing this forum: ejwittwer and 2 guests