Due to work constraints I have not been able to work on the trailer much. It now is stored inside my other trailer.
I have been designing and redesigning in my head over and over.
I am considering adding a water tank that I originally was not going to have.
I was considering three options.
My original thought was to use portable 5-7 gallon jugs and fill as we go.
Down side is moving them regularly (my back cringes about this option).
Second option, a tank mounted between the wheel wells above floor level(25 gallons, 6" high).
Third option, due to frame design, is two smaller 13 gallon tanks mounted lower.
The Timbren suspension I am using has the option of a cross member that is three inches lower than the bottom of the frame (good start to skid plate).
That would put the two tanks that are 14" tall, 6 inches below floor level. That would reduce ground clearance, but also reduce Cg.
The loss of clearance still puts the trailer clearance better than the TV.
This pic shows the place for the optional cross member (upside down).
Any thoughts?