I've been designing a modified and stretched cub. It is 5x10 on a welded Northern Tool trailer. I'm replacing the original suspension with Timbren independent, and adding 15" wheels and tires. Here are some early sketches. I'm doing some last minute tweaking to the plans. I have begun ordering parts for my build. The suspension is on the way. In the next week or two I'll pick up the trailer.
The floor and walls are skeletonized, insulated 3/4" with 1/4" outside walls and 1/8" inside walls, headliner and roof. The whole thing will be skinned in .040" Aluminum. I'm also stretching the tongue for more clearance and better backing.
Several quick questions for the forum:
What is the min height needed for my roof cross-members? I'm tall, so I'd like to gain as much headroom as possible without going over 48" OAH. I have a 1.5" drawn now but if 1" or 3/4" would work...
Would I need more than 6 bolt anchors for the floor to frame?
Thanks.
David