Chesapeake Light Craft Teardrop Trailer

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Sat Jan 21, 2017 5:52 pm

The holes are already oversized. The hinge bolt is significantly smaller. So I assume the fill and drill method. I am contemplating gluing in some tubing. This epoxy that comes in the kit is some really hard stuff so it may be tougher then an aluminum bushing.

Sent from my Altair 8800 using Tapatalk
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm

Re: Chesapeake Light Craft Teardrop Trailer

Postby Alan_H » Mon Jan 23, 2017 12:57 pm

Thanks for that... great idea! :applause:

What thickness is the plywood on the shell?
Alan_H
Lifetime member
 
Posts: 245
Images: 17
Joined: Mon Dec 02, 2013 4:44 pm

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Mon Jan 23, 2017 5:39 pm

Alan_H wrote:Thanks for that... great idea! :applause:

What thickness is the plywood on the shell?


4mm I believe.
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby Alan_H » Tue Jan 24, 2017 10:29 pm

I was guessing 4 or 6, I guess 4 works better for the bends, and the stitch & glue method along with the opposing arcs gives it plenty of strength.
Thanks again friz!
Alan_H
Lifetime member
 
Posts: 245
Images: 17
Joined: Mon Dec 02, 2013 4:44 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby tomtnt » Wed Jan 25, 2017 7:04 pm

Alan_H wrote:I was guessing 4 or 6, I guess 4 works better for the bends, and the stitch & glue method along with the opposing arcs gives it plenty of strength.
Thanks again friz!


I'm amazed how strong the structure is- when attempting to place the floor on the shell by myself, I accidentally dropped the extremely heavy floor into the shell and was amazed that there was no damage.
tomtnt
Teardrop Inspector
 
Posts: 5
Joined: Tue Oct 18, 2016 3:21 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Thu Jan 26, 2017 5:05 pm

tomtnt wrote:
Alan_H wrote:I was guessing 4 or 6, I guess 4 works better for the bends, and the stitch & glue method along with the opposing arcs gives it plenty of strength.
Thanks again friz!


I'm amazed how strong the structure is- when attempting to place the floor on the shell by myself, I accidentally dropped the extremely heavy floor into the shell and was amazed that there was no damage.


Agreed, The strength to weight on these structures is amazing!
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Sun Jan 29, 2017 10:42 pm

ImageImage

Sent from my Altair 8800 using Tapatalk
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Mon Jan 30, 2017 11:42 pm

ImageImage
Found some lights that are a good fit. Definitely need a dimmer. These are a little bright.

Sent from my Altair 8800 using Tapatalk
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby AzAv8r » Tue Jan 31, 2017 8:38 am

Bright can be good. Looks like they might work really well for the lighting the galley work surface. Where'd you get them?
AzAv8r
Teardrop Builder
 
Posts: 41
Images: 6
Joined: Fri Jun 21, 2013 4:38 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby lthomas987 » Tue Jan 31, 2017 9:01 am

friz wrote:ImageImage
Found some lights that are a good fit. Definitely need a dimmer. These are a little bright.

Sent from my Altair 8800 using Tapatalk

A dimmer is a great idea! Also depending on the color reflectivity of your interior you might want more light than you think, or in my case(glossy white) way less. Those lights look like they were made for that spot!

Sent from my LGLS991 using Tapatalk
Laura
Bike-Drop a Micro-Foamy Build Journal http://www.tnttt.com/viewtopic.php?f=50&t=59274
My first Superlegarra-ish Foamy build http://www.tnttt.com/viewtopic.php?f=55&t=59049
User avatar
lthomas987
Donating Member
 
Posts: 357
Images: 204
Joined: Sun Feb 02, 2014 2:41 pm
Location: Minneapolis, MN, USA
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Tue Jan 31, 2017 11:02 am

The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Sat Feb 04, 2017 9:18 pm

Bench testing lights and dimmers.

https://goo.gl/photos/Ka7r7dekUJN5BhKm7

Sent from my Altair 8800 using Tapatalk
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby Dave Gray » Mon Feb 06, 2017 10:49 pm

KingAirNeal wrote:Image


Sent from my iPad using Tapatalk


Friz

Your build will sell more CLC tears than their website. You are a craftsman with the medium and now I am considering one as a future build. I am a big fan of WoodenBoats and their lines. My first teardrop build will be Old School and heavy because I plan to haul a lot of Iron and will basically be sleeping in the Chuck Wagon.

I got KingAirNeal to bring you a few more tons of likes for me.

Dave Gray
Last edited by Dave Gray on Sun Feb 12, 2017 11:49 pm, edited 2 times in total.
User avatar
Dave Gray
Teardrop Advisor
 
Posts: 51
Joined: Mon Jul 13, 2015 5:12 pm
Location: New Philadelphia, OH
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby KingAirNeal » Mon Feb 06, 2017 11:02 pm

I have a few more like it.


Image

Image

Image

Image


Sent from my iPad using Tapatalk
KingAirNeal
Teardrop Master
 
Posts: 130
Joined: Tue May 20, 2014 1:06 pm
Top

Re: Chesapeake Light Craft Teardrop Trailer

Postby friz » Tue Feb 07, 2017 10:09 am

Thanks for the kudos. Truthfully, this medium is pretty forgiving. I would never attempt this without a kit. CLC'S parts are a perfect fit.

Sent from my Altair 8800 using Tapatalk
The "Sin Bin"
150133
User avatar
friz
500 Club
 
Posts: 737
Images: 2
Joined: Mon Jan 03, 2011 10:01 pm
Top

PreviousNext

Return to Build Journals

Who is online

Users browsing this forum: No registered users and 11 guests