Tested out the tongue box to see if it will hit at full radius turn and it seems good. I'm sure Jack knifing will hit but I'm not planning on reversing into tight spacers or at all if possible.
I got Brave and decided to start on my PMF. I follow the guide from another Forum Builder ghcoe or George, and used his technique on applying canvas. He had a genius method of using a round tube to hang the canvas over the side and do small sections at a time. I diluted the glue to a 50/50 mix and started by brushing on to the wood and then rolling the canvas down and using the roller to roll a thicker amount on the canvas. He mentioned in his build Journal that he did not pre shrink or iron the canvas because once it shrink it would tighten up and eliminate wrinkles so I'm giving it a try. He also stated that you need at least 12 in extra around the edges so just to be safe I bought a 9 by 12 for each side from The Big Box store. Sorry I didn't take many photos along the way it was because I was trying to rush. He also mentioned not to do any overlapping until each canvas is dry so I guess it will be one day at a time.
*Update*
I had to add another layer of glue mix because I notice spots where it wasn't binding. The paint roller helps a lot to push out air bubbles. I just jumped on the pc version of tnttt.com and I can't see my photos but the app version I can see everything.... strange..
Sent from my ONEPLUS A3000 using Tapatalk