RE RUN 2 Neverland on Wheels

...ask your questions in the appropriate forums BUT document your build here...preferably in a single thread...dates for updates, are appreciated....

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun May 27, 2018 8:10 am

started on the porta kitchen today
Attachments
iUKGCdGn73j5MXfn-pic-jpg.jpg
iUKGCdGn73j5MXfn-pic-jpg.jpg (385.17 KiB) Viewed 388 times
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun May 27, 2018 8:12 am

img_0529.jpg
img_0529.jpg (946.2 KiB) Viewed 387 times
by the end of the day I had the final design figured out
Attachments
kjwdUSRzTBajgT4g-pic-jpg.jpg
kjwdUSRzTBajgT4g-pic-jpg.jpg (384.86 KiB) Viewed 387 times
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun May 27, 2018 8:14 am

need to spend time on the drop down legs
Attachments
img_0529.jpg
img_0529.jpg (946.2 KiB) Viewed 386 times
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun May 27, 2018 8:22 am

tomorrow is a holiday free day for me so I will see what I can get done. Trailer is ready for the siding
Attachments
m3jCay4aJC7QFcd3-pic-jpg.jpg
m3jCay4aJC7QFcd3-pic-jpg.jpg (337.39 KiB) Viewed 385 times
gDjPqH0GXMDZdti2-pic-jpg.jpg
gDjPqH0GXMDZdti2-pic-jpg.jpg (284.11 KiB) Viewed 385 times
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Fri Jun 08, 2018 6:41 pm

the chuck wagon turned out pretty good and I added a few other things to it to round out the camping experience. It has a 12v recept, a power switch for the water pump and a couple of brackets to add to mount a table and sink to. LED counter lights and divided shelving
Last edited by Sidekick on Sat Jun 09, 2018 1:00 pm, edited 1 time in total.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Mr. Lahey » Fri Jun 08, 2018 9:10 pm

Nice progress on your trailer build. :thumbsup:

Very very cool backyard yard full of Fiberfab Avengers!!!! 8) 8)
My build journal: viewtopic.php?f=50&t=64721
User avatar
Mr. Lahey
Teardrop Master
 
Posts: 111
Joined: Wed Oct 28, 2015 3:18 am
Location: Delavan WI
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Thu Jun 14, 2018 11:04 am

I got the full length trailer door cut down to 39 inches and was able to save the screen door feature. Fits like a glove.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun Jun 17, 2018 1:32 pm

I put formica on the top of the portable kitchenette and sealed the wood for painting. I also pulled the 12v wires thru the back for the LED wiring for night time cooking. Moving slowly, money is tight, but I want to have it on the road soon. The water tank is mounted, furnace set, the next move is to skin the outside with frp and get started on the inside insulation and finish the interior.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sat Jun 23, 2018 7:21 pm

I bought frp cement and waited 2 days- I was able to pull the skin right of with little effort. Back to the drawing board. Pulled the skin off and pulled the glue off like hardened bubble gum.Getting it off the plywood was another story, but I am 80 percent done removing it. Bought a good weld wood contact cement and tried it on some of the scraps. one hour later I could not separate the pieces so I know what direction I am going from now on.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sat Jun 23, 2018 7:22 pm

I thought about posting more of my progress , but decided to concentrate more on the actual project rather than posting pictoral updates. Nobody makes comments or suggestions anyway.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby pchast » Sat Jun 23, 2018 9:55 pm

Ah, But, we still read it and some pictures help understanding. :applause:
pchast
Platinum Donating Member
 
Posts: 1396
Images: 96
Joined: Mon Jan 28, 2013 5:47 pm
Location: Athens, NY
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Sun Jun 24, 2018 7:52 am

" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Fri Jun 29, 2018 2:05 pm

I have tried 3 times to upload images but am told each time they are invalid- normal Jpg files as before, but now not accepted
So much for posting
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby Sidekick » Thu Jul 05, 2018 6:36 am

I thought that I should pass this along. There is a business just south of my town that is selling all kinds of trailer stuff wholesale. Trailer doors with screens for 130.00, lights- LED and standard. Furnaces, hot water heaters, seats, cushions, windows, and tons of other stuff. I was in heaven when I found it. Prices are reasonable and he is willing to find parts for you . I do not have the name right now, but I will find it and post the info soon.
" Chances are- if you don't know where you are going, you will never get there"
User avatar
Sidekick
Teardrop Master
 
Posts: 165
Images: 82
Joined: Fri Feb 28, 2014 5:38 pm
Location: Michigan
Top

Re: RE RUN 2 Neverland on Wheels

Postby pchast » Thu Jul 05, 2018 8:42 pm

Wow.. Great find! :thumbsup:

Thanks,
pchast
Platinum Donating Member
 
Posts: 1396
Images: 96
Joined: Mon Jan 28, 2013 5:47 pm
Location: Athens, NY
Top

Previous

Return to Build Journals

Who is online

Users browsing this forum: Wyorev and 3 guests