Page 1 of 1

My project to be

PostPosted: Mon Jul 20, 2015 4:53 pm
by PatxiPt
http://s288.photobucket.com/user/Patxip ... a.jpg.html

As some may be aware from my introduction ad other topics, my wife and I bought this 35 y.o. canned ham, an Adria 450D, just 2 months and a half younger than me.

It didn't seem to be as bad as it is - that's why we bought in the first place!

Upon arriving home, I started to take stuff out for cleaning, and began to realize what a can of worms - not ham - we had bought. :stompspam: :cry:

Besides 2 cracked windows, another crack developed on another one, so we are now left with 3 good windows.

The entry floor collapsed, revealing concrete :shock: as a filler between 2 pieces of aluminium.

gallery/image_page.php?album_id=4042&image_id=134334&sk=t&sd=d&st=0

Cutting the rotten sill, all its full 10" of a 8' original lenght, and ply showed a somewhat good main pine framing.

gallery/image_page.php?album_id=4042&image_id=134336&sk=t&sd=d&st=0

But the right side wall is flopping with no support of the existing sill frame. Front lower curve is also hanging the and I don't dare to see what damage may be lurking at the rear corners.

All 4 corners of the sandwich floor are rotten/delaminating inside and out. Did I mention the floor is spongy?

Every time I walk up to the trailer, I keep having this urge to get a gallon of gas and a lighter... :twisted:

_________________________________________ Edit: [IMG] code not working, so removed from photo links.
Android edit not working, finished from my Windows Phone

Re: My project to be

PostPosted: Thu Jul 30, 2015 9:14 am
by SuperShady1
WOW!!! :? :? :?