by troubleScottie » Sat Jul 15, 2017 5:34 pm
Just glancing at the ShurFlo pumps, most have a 9ft vertical self priming capability. They state the pump should be place in an area that is dry and ventilated (heat).
I have seen several images of these pumps being mounted under the bed which means it might get wet from road splash. The manual suggests not doing that.
The only thing to remember, the tubing/piping between the pump and tank may need a drain. Water/air may not pass through the pump when it is off.
Michael Krolewski
Scottish Terrier Fancier