laursand's Canvas over Plywood

Canvas covered foamies (Thrifty Alternatives...)

Moderator: eaglesdare

Re: glue info for foamies

Postby OP827 » Wed May 06, 2015 6:46 pm

GPW wrote:“ that it will actually reduce the strength of TB2 “ .... logical but not quite applicable , only because even thinned TB2 will make a stronger bond than the Foam ... The foam always will fail first , not the glue ... Try wetting the fiberglass cloth with plain water before applying the glue , A common spray bottle will work ...


The structural strength of skin is required in my case of roof upper part not so much adhesion of the foam, since there is no other structural element but the skin. I think I'll need all strength that TB2 can provide in the laminate.
My foldable foam trailer build: http://www.tnttt.com/viewtopic.php?f=50&t=61344
OP827
Donating Member
 
Posts: 1017
Images: 279
Joined: Fri Apr 25, 2014 7:27 pm
Location: Bruce County Ontario

Previous

Return to Foamies

Who is online

Users browsing this forum: No registered users and 3 guests

cron