Re: Making a hot wire
Posted: Wed Apr 17, 2019 7:23 pm
I made a long cut foam board cutter currently it 4' but I will be trying 8' tomorrow (hopefully not to much resistance)
Using picture hanging wire (or probably .030 welding wire) I made a 5 ft length attached to a board with a screw. On the other end was a bolt that was set below a platform for the foam board. Just put the wire on the line and turn on the juice and you get a nice straight cut.
Using picture hanging wire (or probably .030 welding wire) I made a 5 ft length attached to a board with a screw. On the other end was a bolt that was set below a platform for the foam board. Just put the wire on the line and turn on the juice and you get a nice straight cut.