Plan drawings, notes in Open Office .PDF

Canvas covered foamies (Thrifty Alternatives...)

Moderator: eaglesdare

Re: Plan drawings, notes in Open Office .PDF

Postby Werdahekrwe » Thu Oct 01, 2015 12:07 am

Since I am planning to add a "Duck tail" to the "FOAM DUCK", would I be improving the design if I "re-styled" the front by setting the front angles to15°, too? They are currently at 45° on all sides and roof. This would, of course, change the overall front to having a larger "flat nose" facing the tow unit. Once again, thanks for any/all feedback.
Always remember: You can't fly with eagles if all you hang around with are turkeys.
User avatar
Werdahekrwe
Teardrop Advisor
 
Posts: 66
Images: 0
Joined: Sun May 03, 2015 9:15 am

Re: Plan drawings, notes in Open Office .PDF

Postby GPW » Thu Oct 01, 2015 7:37 am

But wouldn’t that reduce the room inside ... ?
There’s no place like Foam !
User avatar
GPW
Gold Donating Member
 
Posts: 14911
Images: 546
Joined: Thu Feb 09, 2006 7:58 pm
Location: New Orleans

Re: Plan drawings, notes in Open Office .PDF

Postby Werdahekrwe » Thu Oct 01, 2015 9:44 am

Thanks, for the input GPW. However, the front of the "Duck" is a storage area over the tongue. On the back the "tail" won't really cost that much space, and I think the fuel mileage and handling improvement will really offset the loss of less than 6 sq inches of lost space. Especially since it will be in the dinette/sleeping area. We are both under 5-4, and the 'beds' are 6'. Thanks again. Looking forward to seeing the logo. :D
Always remember: You can't fly with eagles if all you hang around with are turkeys.
User avatar
Werdahekrwe
Teardrop Advisor
 
Posts: 66
Images: 0
Joined: Sun May 03, 2015 9:15 am
Top

Previous

Return to Foamies

Who is online

Users browsing this forum: No registered users and 15 guests