Moderator: eaglesdare
linuxmanxxx wrote:I'm looking real hard at styrospray foam coatings. Plastic that's as hard as golf ball shell and water based type non toxic application. Going with the thickness they say and coverage it was looking like about 300 to cover a stand-up type build which compared to aluminum or frp is decent priced.
Sent from my Nexus 6P using Tapatalk
linuxmanxxx wrote:Hopper like for acoustic ceilings 20 bucks on sale at HF usually.
linuxmanxxx wrote:I'm looking real hard at styrospray foam coatings. Plastic that's as hard as golf ball shell and water based type non toxic application. Going with the thickness they say and coverage it was looking like about 300 to cover a stand-up type build which compared to aluminum or frp is decent priced.
Sent from my Nexus 6P using Tapatalk
greygoos wrote:I know ABS has been suggested before. It is on a thread somewhere about using ABS over foam for a rooftop tent. 3M makes an epoxy glue that bonds ABS to foam but only comes in small tubes. I am going to try some testing with bonding some ABS sheet to foam. I will post if anyone is interested. I built a Foamie about 6 months ago and used FRP - the cheap stuff not Filon and used Pl Premium to bond but PL wont stick to ABS.
Users browsing this forum: No registered users and 16 guests