Teardrops n Tiny Travel Trailers

Still have one more line to figure out,
Plan was to figure it out today;
Turned into door, now its hinge, I need two door hinges & a window to draw the doors

Some day I may draw it; but after a few months of attempting another way is "working"
Got one line on the dirt side Radius (Shown) Only need the correct line on the other side of it. Twice

If anyone know's where the (You might be building a teardrop?) list is;
please share where. Been looking for a while

Inside with a little glue & a few Temporary kabob sticks.
havent found / looked for a hinge yet.
Foam 30" x 36 " Door cut out with tab's; then glass in the Right shown side Panel, 1.5" wall & Door.
All on a HF Tool box

They were made to keep taping the thing together but both are right sides

Found a place for the xtra; bottom left holds the wall square.
The piece on the front right has the line I've wondered about but it's, Very short for the Top Radi to rest on.
and this is four of 11 piecees just for the front, but its Huge!
My Mini Jack likes it already.

Cleaned pieces and me but still heard (Look at your close)
the wrong side one almost looks better then
Still hope the hatch back open's

I took the tape off and put the Sika on the Sucka
And still don't have the line figured out.

Yesterday's High of 83 was a nice break, for the honey dew's so I moved things around (Cleaned)
And thought I can find that # EZ.
Now I just need to cut the tops at that Angle
and cut the left side

Found this Sewing Machine base; My bride likes it less then my foamie,
Are you sure this will hold you up

I think it will adjust to the angle I need ;
And hold the hot wire for a vertical drop .

She said find something to do Then she found what I was Doing

Front nose at 7' is 75" wide.

Hope it comes off the tape

Front cut still has me afraid but I am getting close
Ordered hinge's to draw Holes / Octagon shape Tee Nut Holder's?
Found Window sizes at Teardrop Tech, will size that up shortly,
It was move the Axle forward, Or add to the tail
I still like my Square door bottoms but may change

I still like my Square door bottoms but may change

My doors have round corners, so the seals don't have a joint--except the one at the bottom. So I guess it depends on how you're going to seal them.





Tony

Your doors do look good.
Ill draw 2 more before I cut them.
Thanks Tony.

Dumped two vacuum cleaners yesterday in a 13 gallon bag (Gender reveal)