Monstaliner questions!

Finishes, paints and coatings

Re: Monstaliner questions!

Postby BretMaverick » Wed May 09, 2018 4:09 pm

Thanks for the info Andrew! I have been thinking about this and I did purchase some stuff off of amazon to improve the structure a little bit but I still don't know that I will actually go through with it or not. I suppose a little more structure support couldn't hurt right? At the same time, I would hope the instructions that I have are meant to build a solid, long lasting camper along with a handful of small improvements I made myself that I think should help. I have no idea if the "torsional rigidity" will be an issue or not. I have not picked the camper up and tried twisting it :lol:

In all seriousness, I've followed the instructions I have for the most part, but they are instructions I feel are meant for someone who knows what they are doing, which I do not. A lot is left out which is where this message board has been a MASSIVE help. This isn't just my first teardrop project, this is basically my first big project period. Perhaps a bit ambitious for an armature but even through I've made a few mistakes I feel like I have a pretty solid camper right now. Will it fall apart at 75+ miles an hour down the road? Will too much shaking on a trail cause it to crack? I certainly hope not but only time is going to tell!
BretMaverick
Teardrop Inspector
 
Posts: 17
Joined: Mon Jan 22, 2018 4:10 pm
Location: Chandler AZ

Re: Monstaliner questions!

Postby BretMaverick » Fri May 18, 2018 10:52 am

So adventures in fiber-glassing did not go well this morning lol. It's definitely above my skill level as I was quickly finding out. It seemed like I was mixing correctly, it hardened just fine, but I don't know if I was just being too slow or if Arizona is too hot, but the resin was drying insanely fast, pretty much too fast to effectively apply the fiberglass cloth. I got the sides done but there are lots of air pockets and chunks sticking all over. I was following the directions on the can of resin but I think it was just drying too darn fast. I definitely mixed too much the first time, but after that I was only mixing small amounts as it said small amounts harden slower, but it didn't seem to matter once the sun was out and blazing down on me.

I think I'm blaming the sun on this one, but chances are I was doing something wrong as well. Either way, I'm going to trust that the plans I have were meant to be sturdy! Corners are fiber-glassed at least.
BretMaverick
Teardrop Inspector
 
Posts: 17
Joined: Mon Jan 22, 2018 4:10 pm
Location: Chandler AZ

Re: Monstaliner questions!

Postby BretMaverick » Mon May 21, 2018 6:19 pm

Put the Monstaliner on this weekend, took this picture at the second coat, but did a total of 3 coats. I will say it looks pretty good, really happy with the results. Also happy I did 3 coats as it hid some of the problem areas better than 2 coats did. Doesn't roll on quite as thick as I thought it would or maybe I was just rolling it too thin, but after 24 hours it's looking really good right now and seems super solid. 2 gallons was more than enough for 3 coats, 1 gallon would not have been enough for 2 coats though so glad I got the two gallon pack. Have to say I am happy with the Monstaliner results!

Image
BretMaverick
Teardrop Inspector
 
Posts: 17
Joined: Mon Jan 22, 2018 4:10 pm
Location: Chandler AZ
Top

Re: Monstaliner questions!

Postby DaddyJeep » Wed Jun 20, 2018 10:55 am

BretMaverick wrote:
clamlamp wrote:
capital369 wrote:I have sprayed bedliners for 24 years and I'v sprayed a TT 8 years ago. I can tell you when you get a leek ( and you will ).... it will fail. I have a $35,000 spray rig .. skids of material ... and I'm going metal for my next build... Kevin
How does it fail? Is it sun exposure over time or vibration cracks? Just curious on your experience

Sent from my ONEPLUS A3000 using Tapatalk



I was just going to ignore his comment as 1, Monstaliner is roll on not spray on, 2, they make their product for multiple purposes, and 3, he spelled leek wrong. Either that or he meant he suddenly had leeks which would be super bizarre. if bedliners cause leeks to grow all over the place maybe I don't want it!




I thought leeks were a New England thing. How does a guy from AZ know about leeks?
My big hybrid toy hauler with lots of curves build viewtopic.php?f=50&t=69618

155894
User avatar
DaddyJeep
Teardrop Master
 
Posts: 100
Images: 22
Joined: Sun Nov 19, 2017 5:30 pm
Top

Re: Monstaliner questions!

Postby tony.latham » Wed Jun 20, 2018 1:04 pm

DaddyJeep wrote:
BretMaverick wrote:
clamlamp wrote:
capital369 wrote:I have sprayed bedliners for 24 years and I'v sprayed a TT 8 years ago. I can tell you when you get a leek ( and you will ).... it will fail. I have a $35,000 spray rig .. skids of material ... and I'm going metal for my next build... Kevin
How does it fail? Is it sun exposure over time or vibration cracks? Just curious on your experience

Sent from my ONEPLUS A3000 using Tapatalk



I was just going to ignore his comment as 1, Monstaliner is roll on not spray on, 2, they make their product for multiple purposes, and 3, he spelled leek wrong. Either that or he meant he suddenly had leeks which would be super bizarre. if bedliners cause leeks to grow all over the place maybe I don't want it!




I thought leeks were a New England thing. How does a guy from AZ know about leeks?


Maybe he's got a garden?

Capital369 has posted twice on this forum and for 24 years he sold a product he knew would fail. :thinking:

Tony
Image
User avatar
tony.latham
Gold Donating Member
 
Posts: 2750
Images: 17
Joined: Mon Jul 08, 2013 4:03 pm
Location: Middle of Idaho on the edge of nowhere
Top

Re: Monstaliner questions!

Postby Andrew Herrick » Sun Jun 24, 2018 1:30 am

Finally got around to snapping some shots. I used burnt orange, just for the sidewalls. Monstaliner has dozens of awesome colors, though. If you look carefully, you can see some dimples around the perimeter of the sidewall where I filled in some counterbored holes. Unfortunately, I didn't use the right stuff - grr! - and it slightly expanded during its cure, creating gentle bubbles. It's just a small cosmetic thing, but good to remember for the future. Monstaliner will hide small imperfections like scratches, but it's not self-leveling on vertical surfaces, so make sure your substrate is good and flat.

Check the galley here: https://www.facebook.com/pg/boondockcam ... 1409121445
A few of my builds:

ImageImageImageImage


SEE MORE AT: boondockcampers.com
User avatar
Andrew Herrick
Teardrop Master
 
Posts: 271
Images: 15
Joined: Mon Apr 25, 2016 5:39 pm
Location: Cedar City, Utah
Top

Re: Monstaliner questions!

Postby BretMaverick » Tue Jul 10, 2018 5:23 pm

Andrew Herrick wrote: Check the galley here: https://www.facebook.com/pg/boondockcam ... 1409121445


Gotta say that's actually a pretty nice looking orange!
BretMaverick
Teardrop Inspector
 
Posts: 17
Joined: Mon Jan 22, 2018 4:10 pm
Location: Chandler AZ
Top

Re: Monstaliner questions!

Postby Aviatorbrew » Mon Sep 03, 2018 3:14 pm

we painted our trailer with monstaliner today, I didnt like the really rough texture that it has so I used a less aggressive nap roller
I was able to apply 3 coats and it turned out pretty good.
my trailer was sheated with flat metal but it oil canned very badly, so I removed it, replaced the 1/4 ply
sealed up up with 3 coats of gloss poly

the texture is more like orange peal than the aggressive texture that the monsta liner normaly produces
Andy & Mandy's Luv Shack!

64" x 12' standie, "under construction"

2018 4 runner
2007 tacoma 4 dr 4wd
Aviatorbrew
Teardrop Builder
 
Posts: 25
Images: 25
Joined: Tue May 23, 2017 3:00 am
Top

Previous

Return to Skinning secrets

Who is online

Users browsing this forum: No registered users and 1 guest