Dura-tuff: Anybody familiar with this clear coat?

Finishes, paints and coatings

Dura-tuff: Anybody familiar with this clear coat?

Postby BillZ » Thu Feb 06, 2014 5:49 pm

Link here:

http://creative-wholesale.com/Dura-Tuff.html

I would like to know if anyone has used it and their opinion of it.
User avatar
BillZ
The 300 Club
 
Posts: 308
Images: 0
Joined: Tue Feb 16, 2010 7:39 pm
Location: College Park, Maryland

Re: Dura-tuff: Anybody familiar with this clear coat?

Postby racingchef » Sat Mar 22, 2014 9:54 am

never heard or used this stuff.
there is a product out there called durabake.
it is a coating not unlike truck bed liners...comes in different colors, with or without UV protection and smooth or bumpy finish
when / if i do make my tt i am planning on using it for the exterior
Hope this helps
racingchef
Teardrop Inspector
 
Posts: 2
Joined: Sun Feb 23, 2014 5:05 am

Re: Dura-tuff: Anybody familiar with this clear coat?

Postby working on it » Sun Mar 23, 2014 5:48 pm

racingchef wrote:never heard or used this stuff.
there is a product out there called durabake.
it is a coating not unlike truck bed liners...comes in different colors, with or without UV protection and smooth or bumpy finish
when / if i do make my tt i am planning on using it for the exterior
Hope this helps
I will re-coat my polyurethane and acrylic enamel painted trailer with Durabak if or when the paint fails. I've counted on using the Durabak as a fail-safe (just in case I was wrong about the durability of the paint(s) I used). http://www.durabakcompany.com/automotive.htm?gclid=CImr2Z3dqb0CFVFp7AodU2MA_Q
2013 HHRv "squareback/squaredrop", rugged, 4x8 TTT, 2225 lbs
  • *3500 lb Dexter EZ-Lube braked axle, 3000 lb.springs, active-progressive bumpstop suspension
  • *27 x 8.5-14LT AT tires (x 3) *Weight Distribution system for single-beam tongue
  • *100% LED's & GFCI outlets, 3x fans, AM/FM/CD/Aux. *A/C & heat, Optima AGM, inverter & charger(s)
  • *extended-run, on-board, 2500w generator *Coleman dual-fuel stove & lantern, Ikea grill, vintage skillet
  • *zinc/stainless front & side racks *98"L x 6" diameter rod & reel carrier tube on roof
173193172890148599
User avatar
working on it
2000 Club
2000 Club
 
Posts: 2176
Images: 457
Joined: Tue Oct 04, 2011 9:05 pm
Location: DFW Texas
Top


Return to Skinning secrets

Who is online

Users browsing this forum: No registered users and 6 guests